.NET Compact Framework and Intel PXA250

[Eduardo Pavinato Klein]

Hi all.

Is there a .NET CF implementation for the Intel PXA250 processor?

Where can I get it?

Thanks,
Eduardo Klein

 

[Paul G. Tobey [eMVP]]

PXA250 uses an ARM-based instruction set. .NET CF works find on
PXA250-based systems (most new Pocket PC devices are using that processor,
for example).

Paul T.

 

[Ginny Caughey [MVP]]

Eduoardo,

What operating system does your device run? That chip is supported by a
number of CE versions, but only PocketPCs and CE 4.1 and above work with the
..NetCF.

 

[Paul G. Tobey [eMVP]]

Or sometimes it works "fine" ;-)

Paul T.

PXA250 uses an ARM-based instruction set. .NET CF works find on
PXA250-based systems (most new Pocket PC devices are using that processor,
for example).

Paul T.

 

[Eduardo Pavinato Klein]

Ginny,

What about WCE 3.0? Can't I use .NET CF with this OS and processor?

Thanks in advance,
Eduardo Klein.

 

[Ginny Caughey [MVP]]

Eduardo,

CE 3.0 is only supported by .Net CF if it's also a PocketPC.

 

[Chris Tacke, eMVP]

As "fine" as the 250 ever worked...

--
Chris Tacke, eMVP
Co-Founder and Advisory Board Member
www.OpenNETCF.org
---
Windows CE Product Manager
Applied Data Systems
www.applieddata.net

 

[Paul G. Tobey [eMVP]]

True enough. I barely distinguish the 250 from the 255, any more. I doubt
anyone is buying those 250s...

Paul T.