More Raid 0 SATA problems

[Jack Harrell]

Well, it seems that several people have had similar
problems and have posted here. But the final solution has
never been posted. Can someone please tell me how they
fixed their problem?

System:
AMD 3000+ Barton CPU
Leadtek K7NCR18D-ProII motherboard
(uses Silicon Images 3112 SATA chip)
Leadtek A350 TDH myVIVO FX5900 videocard
2x Western Digital WD360 SATA 36BG 10kRPM hard drives
Windows XP Pro OS

I'm trying to set the hard drives up in a raid 0 format as
the primary drive. I've updated the
motherboard bios and the SATA/Raid drivers. The Windows
XP Pro Setup will recognize them as 1 70GB hard
drive and go through the process of formating the drive.
But then at the end when it checks the drive it will give
an error saying a file is corrupt.

I have formatted and installed each drive separately with
no problem. It's just when I set them up as a Raid 0 it
will not work. Seems other people have had this problem,
can any of you tell me how you fixed it?


Thanks

 

[Mike Stewart]

Is raid 0 striping, sorry i forget the numbers. Does it get as far as the
reboot screen, i nkow if it rebouts and u don't let xp instuall the
unsignighed un identified driver it says it cann't read the disks as it does
not use the sriver u told it abbout earlier with the f6 option.