The following is courtesy of Jerry Bryant - MCSE, MCDBA
Microsoft IT Communities:
Here are a set of instructions for patching and cleaning vulnerable or
infected systems for your review and use.
Note:
www.microsoft.com/technet/security and
www.microsoft.com/security are
authoritative in all matters concerning Microsoft Security Alerts! ANY
e-mail, web board or newsgroup posting (including this one) should be
verified by visiting these sites for official information. Microsoft never
sends security or other updates as attachments. These updates must be
downloaded from the microsoft.com download center or Windows Update. See the
individual bulletins for details.
Because some malicious messages attempt to masquerade as official Microsoft
security notices, it is recommended that you physically type the URLs into
your web browser and not click on the hyperlinks provided.
Instructions for patching and cleaning vulnerable Windows 2000 and Windows
XP systems:
Vulnerable Windows 2000 and Windows XP machines may have the LSASS.EXE
process crash every time a malicious worm packet targets the vulnerable
machine which can occur very shortly after the machine starts up and
initializes the network stack.
When cleaning a machine that is vulnerable to the Sasser worm it is
necessary to first prevent the LSASS.EXE process from crashing, which in
turn causes the machine to reboot after a 60 second delay. This reboot
cannot be aborted on Windows 2000 platforms using the Shutdown.exe or
psshutdown.exe utilities and can interfere with the downloading and
installation of the patch as well as removal of the worm.
1. To prevent LSASS.EXE from shutting down the machine during the cleaning
process:
a. Unplug the network cable from the machine
b. If you are running Windows XP you can enable the built-in Internet
Connection Firewall using the instructions found here: Windows XP
http://support.microsoft.com/?id=283673 and then plug the machine back into
the network and go to step 2.
c. If you are running Windows 2000, you won't have a built-in firewall
and must use the following work-around to prevent LSASS.EXE from crashing.
This workaround involves creating a read-only file named 'dcpromo.log' in
the "%systemroot%\debug" directory. Creating this read-only file will
prevent the vulnerability used by this worm from crashing the LSASS.EXE
process.
i. NOTE: %systemroot% is the variable that contains the name
of the Windows installation directory. For example if Windows was installed
to the "c:\winnt" directory the following command will create a file called
dcpromo.log in the c:\winnt\debug directory. The following commands must be
typed in a command prompt (i.e. cmd.exe) exactly as they are written below.
1. To start a command shell, click Start and then click run and type
'cmd.exe' and press enter.
2.Type the following command:
echo dcpromo >%systemroot%\debug\dcpromo.log
For this workaround to work properly you MUST make the file read-only
by typing the following command:
3. attrib +R %systemroot%\debug\dcpromo.log
2. After enabling the Internet Connection Firewall or creating the read-only
dcpromo.log you can plug the network cable back in and you must download and
install the MS04-011 patch from the MS04-011 download link for the affected
machines operating system before cleaning the system. If the system is
cleaned before the patch is installed it is possible that the system could
get re-infected prior to installing the patch.
a. Here is the URL for the bulletin which contains the links to the
download location for each patch:
http://www.microsoft.com/technet/security/bulletin/ms04-011.mspx
b. If your machine is acting sluggish or your Internet connection is
slow you should use Task Manager to kill the following processes and then
try downloading the patch again (press the Ctrl + Alt + Del keys
simultaneously and select Task Manager):
i. Kill any process ending with '_up.exe' (i.e. 12345_up.exe)
ii. Kill any process starting with 'avserv' (i.e. avserve.exe,
avserve2.exe)
iii. Kill any process starting with 'skynetave' (i.e. skynetave.exe)
iv. Kill hkey.exe
v. Kill msiwin84.exe
vi. Kill wmiprvsw.exe
1. Note there is a legitimate system process called 'wmiprvse.exe' that
does NOT need to be killed.
c. allow the system to reboot after the patch is installed.
3. Run the Sasser cleaner tool from the following URL:
a. For the on-line ActiveX control based version of the cleaner you can
run it directly from the following URL:
http://www.microsoft.com/security/incident/sasser.asp
b. For the stand-alone download version of the cleaner you can download
it from the following URL:
http://www.microsoft.com/downloads/...7E-1B6B-4FC3-90D4-9FA42D14CC17&displaylang=en
4. Determine if the machine has been infected with a variant of the Agobot
worm which can also get on the machine using the same method as the Sasser
worm.
a. To do this run a full antivirus scan of your machine after ensuring
your antivirus signatures are up to date.
b. If you do NOT have an antivirus product installed you can visit
HouseCall from TrendMicro to perform a free scan using the following URL:
http://housecall.trendmicro.com/
If you have any questions regarding the security updates or its
implementation after reading the above listed bulletin you should contact
Product Support Services in the United States at 1-866-PCSafety
(1-866-727-2338). International customers should contact their local
subsidiary.
--
Carey Frisch
Microsoft MVP
Windows XP - Shell/User
Be Smart! Protect your PC!
http://www.microsoft.com/security/protect/
-----------------------------------------------------------------------------
| hi there!!!!
| i get an error sayin,
| "lsass.exe system error"
| and after this my computer shutsdown.
| I made all virus removal tool run like sasser,
| Blsate...but still it dosent help
| basically the error appears when i connect to internet....
| Can some one help me urgent.
|
