Linksys BEFSX41 -> SSH Sentinel

[Smackypete]

Point A:
Cable Modem - dynamic IP from ISP (but has remained same for
weeks)
Linksys BEFSX41 VPN Router
Lan setup on Linksys is DHCP, 192.168.1.0/255.255.255.0,
begining Lan address is 192.168.1.100


Point B:
Cable Modem - dynamic IP from ISP (but has remained same for
weeks)
Linksys BEFSR81 Router
Windows 2000
SSH Sentinel 1.2.0.16
Lan setup on Linksys is DHCP, 192.168.10.0/255.255.255.0,
beginning Lan address is 192.168.10.200

============
At Point B, I can run "diagnostics" on the SSH Policy Editor
and it says "An IPSec protected connection can be
established to the remote host or gateway..." So all my
settings are OK, both the VPN log on Point A and the SSH log
on point b confirm this successful connection.

The Proglem is - From Point B, I cannot ping any of the LAN
machines at Point "A"
C:\>ping 192.168.1.100
Pinging 192.168.1.100 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.

Any thoughts?
TIA

 

[Mike]

The Proglem is - From Point B, I cannot ping any of the LAN
machines at Point "A"

Can you ping the point "A" WAN-side-of-the-router IP address?

Mike