IPNATHLP

C

Chris

Any help with this error would be greatly appreciated. I
have reloaded the system, and applied all of the service
packs, and the problems still occurs. Below are the
error details:

Event Type: Error
Event Source: ipnathlp
Event Category: None
Event ID: 32003
Date: 1/4/2004
Time: 8:24:43 PM
User: N/A
Computer: PATTYLAPTOP
Description:
The Network Address Translator (NAT) was unable to
request an operation of the kernel-mode translation
module. This may indicate misconfiguration, insufficient
resources, or an internal error. The data is the error
code.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 1f 00 00 00 ....


I have checked the system by running the following
command from a dos prompt and got the following
informaiton:

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Patty>netsh routing IP NAT show
global
NAT must be installed first.

Since NAT is not installed, I am out of ideas. Any help
would be appreciated.
 
X

XPUSER

Chris said:
Any help with this error would be greatly appreciated. I
have reloaded the system, and applied all of the service
packs, and the problems still occurs. Below are the
error details:

Event Type: Error
Event Source: ipnathlp
Event Category: None
Event ID: 32003
Date: 1/4/2004
Time: 8:24:43 PM
User: N/A
Computer: PATTYLAPTOP
Description:
The Network Address Translator (NAT) was unable to
request an operation of the kernel-mode translation
module. This may indicate misconfiguration, insufficient
resources, or an internal error. The data is the error
code.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 1f 00 00 00 ....


I have checked the system by running the following
command from a dos prompt and got the following
informaiton:

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Patty>netsh routing IP NAT show
global
NAT must be installed first.

Since NAT is not installed, I am out of ideas. Any help
would be appreciated.
==============================================
Are you using ICS or previously using ICS?

http://www.eventid.net/display.asp?eventid=32003&source=ipnathlp
==============================================
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top