IP ROUTING - general - internal browsing issue

  • Thread starter Thread starter John Koswalski
  • Start date Start date
J

John Koswalski

Hello,

When a RAS client phones in the IP ROUTING - general - internal interface
get's an IP address from the defined scope and that IP address seems to
become MAster browser. This ruins the browsing capabilities of the local
clients.

Any tips on what is happening here?

Thank you
 
Disable netbios over TCP/IP on the RRAS interface. (This is a new form of
the old NT multihomed browser problem.) This requires a registry change.

To prevent Netbt on the RRAS interface.

Open Registry Editor.
Navigate to HKLM\System\CurrentControlSet\Services (continued next line)
\RemoteAccess\Parameters\Ip

Create a new REG_DWORD called DisableNetbiosOverTcpip
Set its value to 1
 
You must log in or register to reply here.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

RAS setup - routing 1
VPN clients getting the same IP address as internal machines 3
IP Routing 2
RAS and DC IP Address confilcts in DNS 1
Route to remote vlan 2
W2003 SP1 RRAS: wrong routing table entry after client VPN connection 3
RAS VPN setup 1
client default gateway 1

Back
Top