Internet Explorer 6 re-install

G

Guest

My IE 6.0 (SP2 - Win XP Pro)) has suddenly become unstable after I removed
some software that was causing pop-ups (even though I have IE configured to
suppress all pop-ups).

Can IE6 be uninstalled and reinstalled? If so, how do I do that?
 
J

Jan Il

Hi Charleybaby :)

The process of removing certain malware may kill your internet connection.
If this should occur, this program, LSPFIX, will enable you to regain your
connection.

Download, install and run LSPFIX from any of the following sites:
http://www.cexx.org/lspfix.htm
http://www.spychecker.com/program/winsockxpfix.html
(if your OS is Win2k or XP)
Also, download, install and run WINSOCKXPFIX available at:
http://www.spychecker.com/program/winsockxpfix.html
and
WinsockXP Fix- WinXP
http://www.spychecker.com/program/winsockxpfix.html
Also, with instructions, at
http://www.iup.edu/house/resnet/winfix.shtm
also
From LavaSoft- all versions of Windows-
http://digital-solutions.co.uk/lavasoft/whndnfix.zip
also ....
(NOTE: It is reported that in XP SP2, the command netsh winsock reset
will fix this problem without the need for these programs.)

If that does not resolve the problem, then try the following and see if it
helps:

With XP you need to go to Start|Run and type "sfc /scannow"
(without the quotes and notice the space between the c and the /.)
Have your XP CD handy and be prepared to go get a cup of coffee - it
takes a while. This will do the same thing as Repair IE6 for XP but a
lot more, that is find any corrupt system files and replace them. It
does not, however, re-register the various software components (except
possibly the ones it replaces?) AFAIK.

Be aware that under certain circumstances (Win2k before SP4 - see mskb
814510,
http://support.microsoft.com/default.aspx?scid=kb;EN-US;Q814510) sfc
can erroneously overwrite (restore over) previously installed files
from certain "hotfixes" which will then need to be re-installed. To
check for this, after running sfc, open a Cmd window and enter
"qfecheck /v /l:c:\" (without the quotes). If you don't have qfecheck
installed, it can be obtained for XP here:
http://www.microsoft.com/downloads/release.asp?ReleaseID=35468 and for
Win2k, obtain qfecheck here:
http://www.microsoft.com/downloads/release.asp?ReleaseID=35470

2. Another alternative that works on Win2k and may or may not work on
XP (but probably does - I've heard both stories), for just IE6 repair
if you don't have IE6 listed in Add-Remove Programs, then in Start|Run
then enter

"rundll32 setupwbv.dll,IE6Maintenance"

without the quotes, exactly as shown, and select the appropriate entry.

3. If you find that you need to do a re-install of IE6 then you can
consider the following, I can't verify this for XP (I'm Win2k - it
works there, and I've had good reports from XP users), but you might
want to give it a try at your own risk. Again, enter this at Start|Run
without the quotes and be careful about the spacing:

"rundll32.exe setupapi,InstallHinfSection DefaultInstall 132
C:\windows\inf\ie.inf"

4. Lastly, here is a link to a MSKB article about re-installing
IE6/OE6:

You cannot install some updates or programs
http://support.microsoft.com/?kbid=822798

"The Software You Are Installing Has Not Passed Windows Logo Testing..."
Error Message When You Try to Install Internet Explorer 6 SP1
http://support.microsoft.com/?kbid=828031

Unable to install Internet Explorer 6 on XP
http://www.tek-tips.com/gfaqs.cfm/lev2/67/lev3/70/pid/779/fid/1586


How do I repair Internet Explorer in Windows® XP?
http://www.dougknox.com/xp/tips/xp_ie_reinstall.htm

How to Reinstall or Repair Internet Explorer and Outlook Express in Windows
XP
http://support.microsoft.com/kb/318378/EN-US/

The ability to Repair Internet Explorer does not exist in the version that
ships with Windows XP. This feature only becomes available after you
upgrade to a newer version. This is normal and has been this way since
Windows 98 and IE4.

However, you can reinstall IE in Windows XP by clicking Start, Run and
entering the following command:

rundll32.exe setupapi,InstallHinfSection DefaultInstall 132
%windir%\Inf\ie.inf

*You will need to have your XP CD available*.

Some people have problems with the command line above. A small VB Script
that will execute the command for you can be downloaded here at
http://www.dougknox.com/xp/scripts/xp_run_ie_setup.vbs. Save the file to
your hard drive and double click it to run IE Setup.


If these steps do not resolve your problem, please post back to this thread
with the details and any error messages.

Hope this helps

Jan :)
Smiles are meant to be shared,
that's why they're so contagious.

Please reply to the newsgroup so others may benefit.
Replies are posted only to the newsgroup for the benefit or other readers.

How to make a good newsgroup post:
http://www.dts-l.org/goodpost.htm
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top