Installing XP using a Ultra ATA133 PCI Controller

[Guest]

I am having a problem installing Windows XP. I purchased an Intel MoBo that
has 1 IDE connection, which I used for the DVD drives. I have two hard
drives: 160gb and 250gb which are connected to a Ultra ATA133 PCI controller
card. After doing some research I read that in order to install XP into one
of those HDs I would need to insert a floppy with the drivers for the
controller card. After Windows installs the drivers from the diskette
(during installation) it recognizes the hard drives. GREAT!!! This is where
my problems begin.

I get to the screen where I have to choose which HD I want to install the OS
on. Whichever one I choose, I get an option to format NTSF (Quick), NTSF, or
keep going. I have formatted both HD already (in a previous atempt to
install) so I chose to keep going. From there the computer restarts and the
whole insallation process starts all over. I have tried multiple drivers
multiple times and I get the same result. Thank you for taking the time to
read this long post and if you can help I would forever indebted to you.

 

[JS]

You need to install the driver for the PCI card during the install.
You should see an option to do this by pressing the F6 key during the
install.
For details see Michael Steven's:
http://www.michaelstevenstech.com/cleanxpinstall.html
Read step 5 (the F6 key)

JS

 

[Guest]

I have done that already done that. But the system restarts and then I have
to start the process all over again.

 

[JS]

Have tried re-formatting the drive (remove the drive you are not going to
install Windows on before your start).

JS