Installed new monitor; now color prints are awash in pink

[Torris Bin Drinken]

Installed a Viewsonic A90f+ monitor but now if I print (HP Deskjet
932 C) everything comes out in a pink tint. How do I calibrate the
printer to the new monitor. Or is that now the issue? (Prints were
fine before monitor changeover)

TIA




Torris

 

[CWatters]

Weird. Are you sure you haven't just run low on cyan ink at the same time by
coincidence?

 

[Torris Bin Drinken]

Weird. Are you sure you haven't just run low on cyan ink at the same time by
coincidence?

No. Installed a brand new color cartridge




Torris

 

[Bob Headrick]

No. Installed a brand new color cartridge

If the new cartridge was actually new but old stock it could be the cause of
your problem. First run a diagnostic self test as shown at the following:
http://www.hp.com/cposupport/printers/support_doc/bpd07098.html#P128_4385

If you do not have cyan, magenta and yellow nozzle patterns the cartridge is
probably the problem. Check the cartridge expiration date as shown at the
following: http://www.hp.com/cposupport/printers/support_doc/bpa02014.html If
the cartridge is still in warranty contact HP or your dealer for a replacement.
If the cartridge is beyond its two year warranty then get a new cartridge.
When buying a new cartridge look for the "install by" date on the carton. I
would look for a cartridge with at least six months remaining before the
"install by" date. Unused cartridges should be stored upright as they would be
if hanging on a store display.

Regards,
Bob Headrick, not speaking for my employer HP