Image XP home to another HD & run?

  • Thread starter Thread starter philo
  • Start date Start date
P

philo

KG said:
Is it possible to image XP home HD to another primary HD, change BIOS load drive to the new drive
and run it? I have tried xxcopy clone, which works fine with 98SE, but it doesn't work. Any help?
*****************
Thank You (e-mail address removed)

To reply to this email please remove the AT
after the kgs in the reply to address as shown above.


although there is software which can image the drive..
unless the hardware of the other computer is the same as the first...
it's not likely XP will run...

best to just perform a clean install on the 2nd machine
 
Is it possible to image XP home HD to another primary HD, change BIOS load drive to the new drive
and run it? I have tried xxcopy clone, which works fine with 98SE, but it doesn't work. Any help?
*****************
Thank You (e-mail address removed)

To reply to this email please remove the AT
after the kgs in the reply to address as shown above.
 
KG said:
Is it possible to image XP home HD to another primary HD, change BIOS load drive to the new drive
and run it? I have tried xxcopy clone, which works fine with 98SE, but it doesn't work. Any help?
*****************
Thank You (e-mail address removed)

To reply to this email please remove the AT
after the kgs in the reply to address as shown above.

xcopy.exe and xxcopy.exe work very well if you observe
these restrictions:
- You must run the command while both disks are
connected as slave disks in some other PC.
- After cloning you must use the Recovery Console
to restore the boot environment.
People normally use one of the popular imaging
products such as Ghost, Acronis, DriveImage or
Snapshot.
 
Today Pegasus (MVP) commented courteously on the subject at
hand
xcopy.exe and xxcopy.exe work very well if you observe
these restrictions:
- You must run the command while both disks are
connected as slave disks in some other PC.
- After cloning you must use the Recovery Console
to restore the boot environment.
People normally use one of the popular imaging
products such as Ghost, Acronis, DriveImage or
Snapshot.
I've long been familiar with xcopy but what is xxcopy?
 
All Things Mopar said:
Today Pegasus (MVP) commented courteously on the subject at
hand

I've long been familiar with xcopy but what is xxcopy?

xxcopy is a terrific shareware tool that can do just about
anything short of a nice cup of coffee. It has so many switches
that I usually need to consult the manual first. Great for batch
files, of limited use in a Command Prompt (unless you have
an excellent memory).
 
Today Pegasus (MVP) commented courteously on the subject at
hand
xxcopy is a terrific shareware tool that can do just about
anything short of a nice cup of coffee. It has so many
switches that I usually need to consult the manual first.
Great for batch files, of limited use in a Command Prompt
(unless you have an excellent memory).

Thanks. I'll Google for it.
 
Today Pegasus (MVP) commented courteously on the subject at
hand

I've long been familiar with xcopy but what is xxcopy?

Similar but groups commands such as clone command
/CLONE Duplicates a directory (volume). Same as /KS/H/E/R/Q/Y/BI/ZY

As to the above post the new image would be used on the same system. I've been backing up that way
for years. It comes in handy if you take a major hit, just switch to the other HD and go, then re
image to defective drive. I have only needed it a couple of times but it has saved a major reload.
*****************
Thank You (e-mail address removed)

To reply to this email please remove the AT
after the kgs in the reply to address as shown above.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Back
Top