HyperThreading

C

Cassien

Hi all,
I have a P4 3.06 GHz (P4 B) with Hyperthreading
technologie.

I want to know if it's possible to windows 2000 to
recognize the hyperthreading technologie without re-
install (install new) Windows 2000.
I just update my hardware from a non HT
processor/motherborad to a fully HT hardware resources :)

please help I don't want to reinstall Windows 2000...

Thx a lot.

Cassien
 
M

Mike Levy

Should be able to just change it. Go into device manager, under
computer. Right-click "ACPI Uniprocessor PC" and on the Driver tab,
click the Change Driver button. Tell it to show the list and select
ACPI Multiprocessor PC. Re-boot and you should be good, as long as HT
is enabled in the BIOS.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Does Windows 2000 Pro support Hyperthreading? 1
How do I enable hyperthreading??? 5
Hyperthreading CPU but 2nd "CPU" not shown 12
How to change from a multi-processor HAL to a single-processor HAL 5
CPU upgrade (hyperthreading issue) 5
hyperthreading off - Windows hangs 2
Microsoft Hotfix for Dual Core & HyperThreading processors? 1
Dell GX270 Hyperthreading and windows xp 2

Top