HP scanjet 3c

[grotto]

I have a HP Scanjet 3c.

I just am not able to make it work anymorein both the Win98 or WinXP
I have used the driver (sj166,exe) and it just can't work.
The software will respond with "unable to communicate with scanner".
I am using it with the advsys SCSI interface.
It use to work before on winXP.
But not after I re- setup the system and loading back all the drivers.
Is there any self test for the scanner
Or is there any other sure to work driver that I can download

thanks

 

[CSM1]

I have a HP Scanjet 3c.

I just am not able to make it work anymorein both the Win98 or WinXP
I have used the driver (sj166,exe) and it just can't work.
The software will respond with "unable to communicate with scanner".
I am using it with the advsys SCSI interface.
It use to work before on winXP.
But not after I re- setup the system and loading back all the drivers.
Is there any self test for the scanner
Or is there any other sure to work driver that I can download

thanks

You should download and install the Adaptec ASPI.
http://www.adaptec.com/worldwide/su...SPI-4.70&sess=no&prodkey=Windows+ASPI+Package

Direct link to download.
http://download.adaptec.com/software_pc/aspi/aspi_471a2.exe

Windows XP does not have the ASPI. Windows 98SE did.