how do I determine if my computer has usb port for USB1 or USB2?

[aaronep]

I have Windows XP Pro with Service Pack 2. My computer has usb ports.

Is it possible to learn without taking off computer case to learn if my
ports are USB1 or if they are USB2?

best, Aaron

 

[Wesley Vogel]

How to Check for High Speed USB (USB 2.0) Support.
The Keyword is Enhanced.

Open the Device Manager...
Start | Run | Type: devmgmt.msc | Click OK |
Click on [+] Universal Serial Bus controllers |

If your Device Manager shows an ENHANCED USB Host Controller, the system has
High Speed USB (USB 2.0) capability.

The key word is ENHANCED. If you have an ENHANCED USB Host Controller then
you have High Speed USB (USB 2.0)

All other types are USB v.1.1

How to Check for High Speed USB (USB 2.0) Support
http://www.usbman.com/Guides/checking_for_usb_2.htm

The difference between v.1.0 and v.1.1 is explained here...

USB Hardware 1.0 vs 1.1 Host Controller Issue Explained
http://www.usbman.com/Guides/USB_version1.0_version1.1.htm

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In

 

[Jim Macklin]

Open Device Manager and look to see if the USB is listed as
Enhanced, which means USB 2.0.
You can also download the Belarc Advisor www.belarc.com and
get a report on the computer and installed software.



|I have Windows XP Pro with Service Pack 2. My computer has
usb ports.
|
| Is it possible to learn without taking off computer case
to learn if my
| ports are USB1 or if they are USB2?
|
| best, Aaron
|

 

[dev]

/[email protected]/ said:

I have Windows XP Pro with Service Pack 2. My computer has usb ports.

Is it possible to learn without taking off computer case to learn if my
ports are USB1 or if they are USB2?

Click START button|RUN and in the box type "msinfo32" (no quotes) <enter>

Click the COMPONENTS + sign, then the USB branch. Look at the list of entries.
If you see one that refers to "enhanced", then the PC has high-speed 2.0
support.

 

[Bruce Chambers]

I have Windows XP Pro with Service Pack 2. My computer has usb ports.

Is it possible to learn without taking off computer case to learn if my
ports are USB1 or if they are USB2?

best, Aaron

Certainly. Look in the manual that came with the computer, or on the
manufacturer's web site.


--

Bruce Chambers

Help us help you:



They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety. -Benjamin Franklin

 

[aaronep]

Hi Wesley: thank's for your super quick reply! I did as you said and
under DEVICE MANAGER, HARDWARE, there is listed ENHANCED USB Host
Controller. But in addition, there are 12 other usb devices,
controllers, listed. How do I know if the Iomega External Hard Drive
is connected to the USB 2 hardware or controller? Is there a speed
test available on the internet or other location that would measure
speed as a USB device is operating?

best, Aaron


**********************************************************************************************

How to Check for High Speed USB (USB 2.0) Support.
The Keyword is Enhanced.

Open the Device Manager...
Start | Run | Type: devmgmt.msc | Click OK |
Click on [+] Universal Serial Bus controllers |

If your Device Manager shows an ENHANCED USB Host Controller, the system has
High Speed USB (USB 2.0) capability.

The key word is ENHANCED. If you have an ENHANCED USB Host Controller then
you have High Speed USB (USB 2.0)

All other types are USB v.1.1

How to Check for High Speed USB (USB 2.0) Support
http://www.usbman.com/Guides/checking_for_usb_2.htm

The difference between v.1.0 and v.1.1 is explained here...

USB Hardware 1.0 vs 1.1 Host Controller Issue Explained
http://www.usbman.com/Guides/USB_version1.0_version1.1.htm

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In

I have Windows XP Pro with Service Pack 2. My computer has usb ports.

Is it possible to learn without taking off computer case to learn if my
ports are USB1 or if they are USB2?

best, Aaron

 

[Uwe Sieber]

Hi Wesley: thank's for your super quick reply! I did as you said and
under DEVICE MANAGER, HARDWARE, there is listed ENHANCED USB Host
Controller. But in addition, there are 12 other usb devices,
controllers, listed. How do I know if the Iomega External Hard Drive
is connected to the USB 2 hardware or controller?

Get MS UVCView:
http://www.microsoft.com/whdc/device/stream/vidcap/UVCView.mspx

It show what are the USB devices connected to.


Uwe

 

[Loren Pechtel]

I have Windows XP Pro with Service Pack 2. My computer has usb ports.

Is it possible to learn without taking off computer case to learn if my
ports are USB1 or if they are USB2?

best, Aaron

Easy. Take a USB2 device. Plug it in. See if you get a warning
about a high speed device on a low speed port. No warning = USB2.
Warning = USB1 or 1.1.