Hit counter won't set to specific number

  • Thread starter Thread starter Rob Bergstrom
  • Start date Start date
R

Rob Bergstrom

Frontpage 2002.
The built in hit counter won't set to a specific number. When I look at the
code it shows the number I said but after publishing it goes to 1 or stays
the same.

Help?
Rob
 
Open your site on the server and change the count on the live page. Click Save and then check the
page in your browser.

--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed............
........................with a computer
 
I can't open it on the server because it is remote and Frontpage won't let
me do ftp "frontpage does not support opening files from FTP servers".
I delete the file on the server and then "publish" and no changes to the
counter except increment by 1.
When in preview mode locally there is no counter just a reference ( [Hit
Counter])
Confused,
Rob
 
If you can't open the site on the server via FP, then the FP hit counter is not going to work, as
the server must have the FP extensions installed, and the site must be published to the server via
FP's http mode

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================


Rob Bergstrom said:
I can't open it on the server because it is remote and Frontpage won't let
me do ftp "frontpage does not support opening files from FTP servers".
I delete the file on the server and then "publish" and no changes to the
counter except increment by 1.
When in preview mode locally there is no counter just a reference ( [Hit
Counter])
Confused,
Rob


Steve Easton said:
Open your site on the server and change the count on the live page. Click Save and then check the
page in your browser.

--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed............
.......................with a computer
Click to expand...
Click to expand...
 
The web hoster said he did have fp server extensions installed.
I must just not know how to make a connection that way....
Rob


Thomas A. Rowe said:
If you can't open the site on the server via FP, then the FP hit counter is not going to work, as
the server must have the FP extensions installed, and the site must be published to the server via
FP's http mode

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================


Rob Bergstrom said:
I can't open it on the server because it is remote and Frontpage won't let
me do ftp "frontpage does not support opening files from FTP servers".
I delete the file on the server and then "publish" and no changes to the
counter except increment by 1.
When in preview mode locally there is no counter just a reference ( [Hit
Counter])
Confused,
Rob


Steve Easton said:
Open your site on the server and change the count on the live page.
Click to expand...
Click
Save and then check the
page in your browser.

--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed............
.......................with a computer

Frontpage 2002.
The built in hit counter won't set to a specific number. When I look
Click to expand...
at
the
code it shows the number I said but after publishing it goes to 1 or stays
the same.

Help?
Rob
Click to expand...
Click to expand...
Click to expand...
 
Change the Publish to location to http://websitename.com instead of ftp://websitename.com

--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed............
........................with a computer

Rob Bergstrom said:
The web hoster said he did have fp server extensions installed.
I must just not know how to make a connection that way....
Rob


Thomas A. Rowe said:
If you can't open the site on the server via FP, then the FP hit counter is not going to work, as
the server must have the FP extensions installed, and the site must be published to the server via
FP's http mode

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp

Rob Bergstrom said:
I can't open it on the server because it is remote and Frontpage won't let
me do ftp "frontpage does not support opening files from FTP servers".
I delete the file on the server and then "publish" and no changes to the
counter except increment by 1.
When in preview mode locally there is no counter just a reference ( [Hit
Counter])
Confused,
Rob


Open your site on the server and change the count on the live page. Click
Save and then check the
page in your browser.

--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed............
.......................with a computer

Frontpage 2002.
The built in hit counter won't set to a specific number. When I look at
the
code it shows the number I said but after publishing it goes to 1 or
stays
the same.

Help?
Rob
Click to expand...
Click to expand...
Click to expand...
 
through frontpage, open your web live, using the http: address you use to
publish.

Rob Bergstrom said:
The web hoster said he did have fp server extensions installed.
I must just not know how to make a connection that way....
Rob


Thomas A. Rowe said:
If you can't open the site on the server via FP, then the FP hit counter is not going to work, as
the server must have the FP extensions installed, and the site must be published to the server via
FP's http mode

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp

Rob Bergstrom said:
I can't open it on the server because it is remote and Frontpage won't let
me do ftp "frontpage does not support opening files from FTP servers".
I delete the file on the server and then "publish" and no changes to the
counter except increment by 1.
When in preview mode locally there is no counter just a reference ( [Hit
Counter])
Confused,
Rob


Open your site on the server and change the count on the live page. Click
Save and then check the
page in your browser.

--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed............
.......................with a computer

Frontpage 2002.
The built in hit counter won't set to a specific number. When I look at
the
code it shows the number I said but after publishing it goes to 1 or
stays
the same.

Help?
Rob
Click to expand...
Click to expand...
Click to expand...
 
Andrew Murray said:
through frontpage, open your web live, using the http: address you use to
publish.

Rob Bergstrom said:
The web hoster said he did have fp server extensions installed.
I must just not know how to make a connection that way....
Rob


Thomas A. Rowe said:
If you can't open the site on the server via FP, then the FP hit
Click to expand...
counter
is not going to work, as
the server must have the FP extensions installed, and the site must be published to the server via
FP's http mode

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp

I can't open it on the server because it is remote and Frontpage
Click to expand...
won't
let
me do ftp "frontpage does not support opening files from FTP servers".
I delete the file on the server and then "publish" and no changes to the
counter except increment by 1.
When in preview mode locally there is no counter just a reference ( [Hit
Counter])
Confused,
Rob


Open your site on the server and change the count on the live
Click to expand...
page.
Click
Save and then check the
page in your browser.

--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed............
.......................with a computer

Frontpage 2002.
The built in hit counter won't set to a specific number. When I
Click to expand...
look
at
the
code it shows the number I said but after publishing it goes to 1 or
stays
the same.

Help?
Rob
Click to expand...
Click to expand...
Click to expand...
 
Ok. I finally got it.
Thanks for helping with a newbie problem.
Rob


Steve Easton said:
Change the Publish to location to http://websitename.com instead of ftp://websitename.com

--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed............
.......................with a computer

Rob Bergstrom said:
The web hoster said he did have fp server extensions installed.
I must just not know how to make a connection that way....
Rob


Thomas A. Rowe said:
If you can't open the site on the server via FP, then the FP hit
Click to expand...
counter
is not going to work, as
the server must have the FP extensions installed, and the site must be published to the server via
FP's http mode

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp

I can't open it on the server because it is remote and Frontpage
Click to expand...
won't
let
me do ftp "frontpage does not support opening files from FTP servers".
I delete the file on the server and then "publish" and no changes to the
counter except increment by 1.
When in preview mode locally there is no counter just a reference ( [Hit
Counter])
Confused,
Rob


Open your site on the server and change the count on the live
Click to expand...
page.
Click
Save and then check the
page in your browser.

--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed............
.......................with a computer

Frontpage 2002.
The built in hit counter won't set to a specific number. When I
Click to expand...
look
at
the
code it shows the number I said but after publishing it goes to 1 or
stays
the same.

Help?
Rob
Click to expand...
Click to expand...
Click to expand...
 
You're welcome.
We were all "newbies" at one time or another.

--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed............
........................with a computer

Rob Bergstrom said:
Ok. I finally got it.
Thanks for helping with a newbie problem.
Rob


Steve Easton said:
Change the Publish to location to http://websitename.com instead of ftp://websitename.com

--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed............
.......................with a computer

Rob Bergstrom said:
The web hoster said he did have fp server extensions installed.
I must just not know how to make a connection that way....
Rob


If you can't open the site on the server via FP, then the FP hit counter
is not going to work, as
the server must have the FP extensions installed, and the site must be
published to the server via
FP's http mode

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp

I can't open it on the server because it is remote and Frontpage won't
let
me do ftp "frontpage does not support opening files from FTP servers".
I delete the file on the server and then "publish" and no changes to the
counter except increment by 1.
When in preview mode locally there is no counter just a reference ( [Hit
Counter])
Confused,
Rob


Open your site on the server and change the count on the live page.
Click
Save and then check the
page in your browser.

--
Steve Easton
Microsoft MVP FrontPage
95isalive
This site is best viewed............
.......................with a computer

Frontpage 2002.
The built in hit counter won't set to a specific number. When I look
at
the
code it shows the number I said but after publishing it goes to 1 or
stays
the same.

Help?
Rob
Click to expand...
Click to expand...
Click to expand...
 
You must log in or register to reply here.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Hit counter 4
Hit Counter question 4
Hit counter stays at 1 8
Hit Counter is only FP component not working 6
Getting Hit Counter to work. 2
Hit counter 1
Hit Counter 3
Hit Counter not working 7

Back
Top