Hi Speed USB host controller

D

Dave Abrams

I just installed a 7 port usb port. The computer says
that this Generic USB divice will function at reduced
speed when plugged into a non HI-SPEED port.

You must add a HI-SPEED host controller to obtain maximum
performance.

Where do I get this controller ????

Thanks for the information.
 
C

Cari MS-MVP

Are the USB ports on the motherboard 1.1 or 2.0 USB? If you connect a 2.0
hub into a 1.1 USB port, you will not gain ANY speed, it can only function
at the lower speed.

If you want a USB2.0 hub to run at USB2.0 speed, you must connect it to a
USB 2.0 port on your PC. If your motherboard does not have USB2.0 ports,
consider adding a PCI USB2.0 card.

Cari
www.coribright.com
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

High speed mass storage device wont register in my computers 2
what should i do? **hi-speed usb host controller** 2
HI-SPEED USB Device Plugged into non-HI-SPEED USB Hub 9
USB 2.0 device-hub problem 3
Hi Speed USB 2.0 4 Port HUB 1
USB 2.0 external drive unrecognized 6
High speed usb device vs non high speed hub 2
USB 2.0 - WinXP - Via chipset - ...non-HI-SPEED port 2

Top