Help with shutdown/startup error

D

Digiquester

Over the past few days I've noticed that my computer (windows to be more
specific) will boot up then shut down after a few minutes. I've already tried
several statagies such as running registry cleaners disk defrag and system
restore. I havn't installed any new USB or external devices lately. However I
did recently use a trial version of Roxio 9 to burn a few DVDs (8 to be
exact). I uninstalled the program but still the problem presists. I opened
the computer and cleaned out the fans. I'm hoping that solves the problem.
Considering how long I've been able to stay on now I'm hoping thats all it
was. But I did manage to copy down this from the BSOD and Black screen,
IRQL not less or equal
0X0000007E
0XC0000005
OXB926200E
OXBA5C0C0CD0
OXBA5C09CC
MarvinBus.sys
Adress B926200E
Base at D923F000
Data Stomp 43247105
I'm gonna try shutting down and restaring again to see if probelm presists.
Would appriciate any help though
 
M

Mark Adams

Digiquester said:
Over the past few days I've noticed that my computer (windows to be more
specific) will boot up then shut down after a few minutes. I've already tried
several statagies such as running registry cleaners disk defrag and system
restore. I havn't installed any new USB or external devices lately. However I
did recently use a trial version of Roxio 9 to burn a few DVDs (8 to be
exact). I uninstalled the program but still the problem presists. I opened
the computer and cleaned out the fans. I'm hoping that solves the problem.
Considering how long I've been able to stay on now I'm hoping thats all it
was. But I did manage to copy down this from the BSOD and Black screen,
IRQL not less or equal
0X0000007E
0XC0000005
OXB926200E
OXBA5C0C0CD0
OXBA5C09CC
MarvinBus.sys
Adress B926200E
Base at D923F000
Data Stomp 43247105
I'm gonna try shutting down and restaring again to see if probelm presists.
Would appriciate any help though

Try Googling MarvinBus.sys and see what turns up. Probably a driver that
needs updating.
 
D

Digiquester

I found the driver on the computer and deleted it, but I think it was just a
gunked up fan. Since I cleaned it everythings been running fine. Thanks for
the advice though
 
P

Paul

Digiquester said:
Over the past few days I've noticed that my computer (windows to be more
specific) will boot up then shut down after a few minutes. I've already tried
several statagies such as running registry cleaners disk defrag and system
restore. I havn't installed any new USB or external devices lately. However I
did recently use a trial version of Roxio 9 to burn a few DVDs (8 to be
exact). I uninstalled the program but still the problem presists. I opened
the computer and cleaned out the fans. I'm hoping that solves the problem.
Considering how long I've been able to stay on now I'm hoping thats all it
was. But I did manage to copy down this from the BSOD and Black screen,
IRQL not less or equal
0X0000007E
0XC0000005
OXB926200E
OXBA5C0C0CD0
OXBA5C09CC
MarvinBus.sys
Adress B926200E
Base at D923F000
Data Stomp 43247105
I'm gonna try shutting down and restaring again to see if probelm presists.
Would appriciate any help though

http://driveragent.com/archive/12183/3-0-1?PHPSESSID=36cdh3gclb8042s138brs8rpk2

"Pinnacle Systems MovieBox Deluxe bus enumerator driver"

Perhaps it is this thing ? I liked the clean picture (better than the picture on
Amazon).

http://www.altera.com/corporate/cust_successes/customer_showcase/pinnacle/csh-pinnacle_lp.html

It appears to be USB based. Is it connected right now ?

Paul
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Help with IRQL Error 2

Top