Help with Maxtor Jumper Settting

[Jeff]

I have an older 4 GB Maxtor HD I want to use slave off of my master HD. I
cannot find the jumper settings to set it for slave anywhere and was hoping
someone here might be able to help. The model is Maxtor 8525006 and I am
trying to jumper it for a slave.

Thanks
J

 

[Harry Avant]

I have a similar type HD, a Maxtor 90432D2, 4.32 GB,
The jumper settings for: only drive in a single drive system J50 (J),
Master in a dual drive system J50 (J), and Slave in a dual drive
system J50 (0). One mine the J50 is the set of pins closest to the IDE
connector.
Harry

 

[Terry Wilson]

I have an older 4 GB Maxtor HD I want to use slave off of my master HD. I
cannot find the jumper settings to set it for slave anywhere and was hoping
someone here might be able to help. The model is Maxtor 8525006 and I am
trying to jumper it for a slave.

Jumper Settings Style A1

(Master)
The vertical jumper over the J50 pins is configuring the drive as a Master.

(Slave)
No jumper is required to configure the drive as a Slave.
The jumper over the J44 and J42 positions is in the jumper storage position.

(Cable Select)
The jumper over the J48 position is configuring the drive for Cable Select.

Hope this helps

 

[chris]

I have an older 4 GB Maxtor HD I want to use slave off of my master HD. I
cannot find the jumper settings to set it for slave anywhere and was hoping
someone here might be able to help. The model is Maxtor 8525006 and I am
trying to jumper it for a slave.

Thanks
J

http://service.maxtor.com/rightnow/images/maxtor_quantum jumpers.htm

Hope this helps.

C.