If you don't have the necessary electrical test equipment (and the requisite
knowledge to use them), or a stock of spare replacement parts - take it to a
service shop!
I would imagine that you don't as per the nature of your post! Testing, or
part substitution, is the only way to diagnose the problem.
--
Regards,
Richard Urban
aka Crusty (-: Old B@stard
If you knew as much as you think you know,
You would realize that you don't know what you thought you knew!
Of course, first check the obvious. Is it plugged into a working outlet
(plug a lamp into the outlet and make sure it is turned on?) Is the power
cable plugged into the back of the computer (they can work loose when moving
a computer on a desk or floor?) If there is a rocker switch on the back of
the computer is the switch turned on (I/O with I pushed in?) If you are
hooked to a surge suppressor or switchbox (had a switch go bad once), remove
them and try into an outlet directly.
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.