FBA Network Installation Error

J

jay

Hi,

I am getting non zero exit code in FBA during network installation and
client for Microsoft network is not done in runtime image, I also can't
explore network shared drives from this run time image the excerpt of FBA
log is as follows.
---------------------------------------------------------
10:04:32 AM - [FBASetProgressText] Installing Network...
10:04:39 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\nettcpip.inf -c p -i MS_TCPIP (ExitCode: 0x4a020)
10:04:40 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\netmscli.inf -c c -i MS_MSCLIENT (ExitCode:
0x8007007e)
10:04:47 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\netrass.inf -c s -i MS_RasCli (ExitCode: 0x0)
10:04:47 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\netrast.inf -c p -i MS_NDISWAN (ExitCode: 0x0)
10:04:48 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\netrass.inf -c s -i MS_RASMAN (ExitCode: 0x0)
10:04:48 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\netrast.inf -c p -i MS_PPPOE (ExitCode: 0x0)
10:04:48 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\netrast.inf -c p -i MS_PPTP (ExitCode: 0x0)
10:04:52 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\netrass.inf -c s -i MS_RasSrv (ExitCode: 0x0)
10:04:52 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\netrass.inf -c s -i MS_Steelhead (ExitCode: 0x0)
10:04:53 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\netserv.inf -c s -i MS_SERVER (ExitCode: 0x0)
10:04:54 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\netgpc.inf -c s -i ms_gpc (ExitCode: 0x0)
10:04:55 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\ndisuio.inf -c p -i MS_NDISUIO (ExitCode: 0x0)
10:04:58 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\netpschd.inf -c s -i ms_psched (ExitCode: 0x0)
10:05:00 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\netdav.inf -c c -i MS_WebClient (ExitCode: 0x0)
10:05:00 AM - [CallEntryPointThread] C:\CNAE_XP\WINDOWS\FBA\FBANET.DLL,
FBAInstallNetworking
10:05:00 AM - [FBASetProgressText] Installing Components...
10:05:02 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\sweninst.exe
asyncmac netrasa.inf (ExitCode: 0x1)
---------------------------------------------------
Build was errorfree and depedancy check was also errorfree

Thanks,

Jay
 
K

KM

Jay,

The first question pops up - did you get NIC driver installed properly on the image?
How entire FBAlog looks like? Also, what about \windows\SetupApi.log file, does it show any errors there?

How did you get your config? Did you run TAP on XP Pro installation on the target hardware?

--
=========
Regards,
KM


jay said:
Hi,

I am getting non zero exit code in FBA during network installation and client for Microsoft network is not done in runtime image,
I also can't explore network shared drives from this run time image the excerpt of FBA log is as follows.
---------------------------------------------------------
10:04:32 AM - [FBASetProgressText] Installing Network...
10:04:39 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l C:\CNAE_XP\WINDOWS\inf\nettcpip.inf -c p -i MS_TCPIP
(ExitCode: 0x4a020)
10:04:40 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l C:\CNAE_XP\WINDOWS\inf\netmscli.inf -c c -i MS_MSCLIENT
(ExitCode: 0x8007007e)
10:04:47 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l C:\CNAE_XP\WINDOWS\inf\netrass.inf -c s -i MS_RasCli
(ExitCode: 0x0)
10:04:47 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l C:\CNAE_XP\WINDOWS\inf\netrast.inf -c p -i MS_NDISWAN
(ExitCode: 0x0)
10:04:48 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l C:\CNAE_XP\WINDOWS\inf\netrass.inf -c s -i MS_RASMAN
(ExitCode: 0x0)
10:04:48 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l C:\CNAE_XP\WINDOWS\inf\netrast.inf -c p -i MS_PPPOE
(ExitCode: 0x0)
10:04:48 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l C:\CNAE_XP\WINDOWS\inf\netrast.inf -c p -i MS_PPTP
(ExitCode: 0x0)
10:04:52 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l C:\CNAE_XP\WINDOWS\inf\netrass.inf -c s -i MS_RasSrv
(ExitCode: 0x0)
10:04:52 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l C:\CNAE_XP\WINDOWS\inf\netrass.inf -c s -i MS_Steelhead
(ExitCode: 0x0)
10:04:53 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l C:\CNAE_XP\WINDOWS\inf\netserv.inf -c s -i MS_SERVER
(ExitCode: 0x0)
10:04:54 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l C:\CNAE_XP\WINDOWS\inf\netgpc.inf -c s -i ms_gpc (ExitCode:
0x0)
10:04:55 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l C:\CNAE_XP\WINDOWS\inf\ndisuio.inf -c p -i MS_NDISUIO
(ExitCode: 0x0)
10:04:58 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l C:\CNAE_XP\WINDOWS\inf\netpschd.inf -c s -i ms_psched
(ExitCode: 0x0)
10:05:00 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l C:\CNAE_XP\WINDOWS\inf\netdav.inf -c c -i MS_WebClient
(ExitCode: 0x0)
10:05:00 AM - [CallEntryPointThread] C:\CNAE_XP\WINDOWS\FBA\FBANET.DLL, FBAInstallNetworking
10:05:00 AM - [FBASetProgressText] Installing Components...
10:05:02 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\sweninst.exe asyncmac netrasa.inf (ExitCode: 0x1)
---------------------------------------------------
Build was errorfree and depedancy check was also errorfree

Thanks,

Jay
Click to expand...
 
J

jay

Hi KM,
Thanks for reply .

I had disabled NETBIOS driver which was causing problems in TCP/IP
installation Now every thing looks OK.
KM said:
Jay,

The first question pops up - did you get NIC driver installed properly on
the image?
How entire FBAlog looks like? Also, what about \windows\SetupApi.log file,
does it show any errors there?

How did you get your config? Did you run TAP on XP Pro installation on the
target hardware?

--
=========
Regards,
KM


jay said:
Hi,

I am getting non zero exit code in FBA during network installation and
client for Microsoft network is not done in runtime image, I also can't
explore network shared drives from this run time image the excerpt of FBA
log is as follows.
---------------------------------------------------------
10:04:32 AM - [FBASetProgressText] Installing Network...
10:04:39 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\nettcpip.inf -c p -i MS_TCPIP (ExitCode: 0x4a020)
10:04:40 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\netmscli.inf -c c -i MS_MSCLIENT (ExitCode:
0x8007007e)
10:04:47 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\netrass.inf -c s -i MS_RasCli (ExitCode: 0x0)
10:04:47 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\netrast.inf -c p -i MS_NDISWAN (ExitCode: 0x0)
10:04:48 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\netrass.inf -c s -i MS_RASMAN (ExitCode: 0x0)
10:04:48 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\netrast.inf -c p -i MS_PPPOE (ExitCode: 0x0)
10:04:48 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\netrast.inf -c p -i MS_PPTP (ExitCode: 0x0)
10:04:52 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\netrass.inf -c s -i MS_RasSrv (ExitCode: 0x0)
10:04:52 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\netrass.inf -c s -i MS_Steelhead (ExitCode: 0x0)
10:04:53 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\netserv.inf -c s -i MS_SERVER (ExitCode: 0x0)
10:04:54 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\netgpc.inf -c s -i ms_gpc (ExitCode: 0x0)
10:04:55 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\ndisuio.inf -c p -i MS_NDISUIO (ExitCode: 0x0)
10:04:58 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\netpschd.inf -c s -i ms_psched (ExitCode: 0x0)
10:05:00 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\snetcfg.exe -l
C:\CNAE_XP\WINDOWS\inf\netdav.inf -c c -i MS_WebClient (ExitCode: 0x0)
10:05:00 AM - [CallEntryPointThread] C:\CNAE_XP\WINDOWS\FBA\FBANET.DLL,
FBAInstallNetworking
10:05:00 AM - [FBASetProgressText] Installing Components...
10:05:02 AM - [FBALaunch] C:\CNAE_XP\WINDOWS\system32\sweninst.exe
asyncmac netrasa.inf (ExitCode: 0x1)
---------------------------------------------------
Build was errorfree and depedancy check was also errorfree

Thanks,

Jay
Click to expand...
Click to expand...
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

FBA Fails to install "Client for Microsoft Networks" 4
Network client error 1
Can't move for FBA Errors Like "RegSetKeySecurity Failed!" 4
Long FBA delays 3
Can't set display settings in TD using Intel(R) 82945G Express video driver 6
FBA Stops with Black Screen 2
Driver install order 5
Display Settings - XP Embedded SP2 - FBA 3

Top