EWF RAM with pagefile.sys

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

We are using SP1 with RAM EWF and pagefile disabled. We are experiencing some
problems with a component that uses a pagefile.

Can we use pagefile with EWF RAM? Should we put the pagefile.sys on a
non-protected partition?

When EWF is enabled and I turn on pagefile and point it to a non-protected
partition. On reboot the pagefile is disabled.

Any ideas?

Thanks,
Tim
 
Switch ON the pagefile in the Target Device, or read documentantion about
EWF
to commit any change in the configuracion
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

EWF - pagefile - SSD 1
Unmounting unprotected drive where PageFile is located 2
FP2007 EWF Ram Registry 2
Using HORM, with a pagefile 1
EWF really suck!!! 5
Need pagefile in EWF Ram Reg? 3
EWF RAM problem 2
Page file on FBWF protected volume 1

Back
Top