Error Messages

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hello Everyone....

I hope someone can help me. Lately I have been receiving two error messages
on my system. It appears to be in the TEMP file area and they are rather
lengthy.

c:\docume 1\used\locals 1\temp\wer. cbd5.dir 00\mini081207-.02.dmp

c:\docume 1\user\locals 1\temp\wer cbd5.dir 00\sysdata.xmd

There are little squiggly horizontal lines where I have left a space before
the numeral one and other areas of the error message where I left a space. I
guess there is some way to type them but I do not know how.

Can someone please give me an idea what is going on as this problem is is
creating other problems on my system. Any help would be greatly appreciated.

Best regards,

Gordon
 
Gordon

You need to post complete copies of the Stop Error Reports.

Disable automatic restart on system failure. This should help by
allowing time to write down the STOP code properly. Right click on
the My Computer icon on the Desktop and select Properties, Advanced,
Start-Up and Recovery, System Failure and uncheck box before
Automatically Restart.

Do not re-enable automatic restart on system failure even after you have
solved the problem as it's better disabled. Check for variants of the
Stop Error message.

An alternative is to keep pressing the F8 key during Start-Up and select
option - Disable automatic restart on system failure.

Please post copies of all Error and Warning Reports appearing in
the System and Application logs in Event Viewer for the last boot. No
Information Reports or Duplicates please. Indicate which also appear in
a previous boot.

You can access Event Viewer by selecting Start, Control Panel,
Administrative Tools, and Event Viewer. When researching the meaning
of the error, information regarding Event ID, Source and Description
are important.

HOW TO: View and Manage Event Logs in Event Viewer in Windows XP
http://support.microsoft.com/kb/308427/en-us

Part of the Description of the error will include a link, which you
should double click for further information. You can copy using copy
and paste. Often the link will, however, say there is no further
information.
http://go.microsoft.com/fw.link/events.asp
(Please note the hyperlink above is for illustration purposes only)

A tip for posting copies of Error Reports! Run Event Viewer and double
click on the error you want to copy. In the window, which appears is a
button resembling two pages. Click the button and close Event
Viewer.Now start your message (email) and do a paste into the body of
the message. Make sure this is the first paste after exiting from
Event Viewer.

--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
 
Gordon said:
Hello Everyone....

I hope someone can help me. Lately I have been receiving two error messages
on my system. It appears to be in the TEMP file area and they are rather
lengthy.

c:\docume 1\used\locals 1\temp\wer. cbd5.dir 00\mini081207-.02.dmp

c:\docume 1\user\locals 1\temp\wer cbd5.dir 00\sysdata.xmd

There are little squiggly horizontal lines where I have left a space before
the numeral one and other areas of the error message where I left a space. I
guess there is some way to type them but I do not know how.

Can someone please give me an idea what is going on as this problem is is
creating other problems on my system. Any help would be greatly appreciated.

Best regards,

Gordon
Click to expand...

Please read all the Info here on these Links provided then the whole
scenario will be fixable for you!.
Do you have one of these Video card: nvidia, Same for ATI video cards,
radeon graphics card.
If yes, you may not have the latest Video drivers and you just downloaded
the drivers from MS updates, which not recommended to do so. So, try and get
the latest drivers from these links:

Nvidia Geforce drivers downloads:
http://www.nvidia.com/content/drivers/drivers.asp

ATI Radeon drivers downloads:
http://ati.amd.com/support/driver.html

The computer may automatically restart, or you may receive a "serious error"
message or a Stop error message in Windows Server 2003, in Windows XP,
http://support.microsoft.com/?scid=kb;en-us;894278

Try to look in the Device Manager for the CD/DVD-ROM and see if it
malfunctioning.
Scan your computer fro malwares and Viruses by whatever software you have.
DMA Mode for ATA/ATAPI Devices in Windows XP
http://www.microsoft.com/whdc/device/storage/IDE-DMA.mspx
How to enable 48-bit Logical Block Addressing support for ATAPI disk drives
in Windows XP
http://support.microsoft.com/kb/303013

Example on the error code:
http://support.microsoft.com/kb/174232

Information about Event ID 51
http://support.microsoft.com/kb/244780/

How to troubleshoot event ID 9, event ID 11, and event ID 15 error messages
http://support.microsoft.com/kb/154690/

left hand column - (9F)
http://aumha.org/win5/kbestop.htm

To get more info about the Error in Event Viewer please double click the
Error message(X) to get a pop-up window contain info about the causer and you
can copy and paste this content in your next message.
I will make sure this machine is malware, Virus free before install/update
any drivers or software, run Disk CleanUp and defrag is safe mode.
Note: some users said by deleting the DUMP folder the error simply
disappeared, so delete the folder from the TEMP:
D:\DOCUME~1\Ami\LOCALS~1\Temp\[ ERf39e.dir00\Mini051607-02.dmp]
D:\DOCUME~1\Ami\LOCALS~1\Temp\[WERf39e.dir00\sysdata.xml]
Click to expand...

[ ERf39e.dir00\Mini051607-02.dmp] <= to be deleted.
HTH.
nass
 
Nass...thank you for the info, much appreciated and helpful.

Regards,

Gordon

nass said:
Gordon said:
Hello Everyone....

I hope someone can help me. Lately I have been receiving two error messages
on my system. It appears to be in the TEMP file area and they are rather
lengthy.

c:\docume 1\used\locals 1\temp\wer. cbd5.dir 00\mini081207-.02.dmp

c:\docume 1\user\locals 1\temp\wer cbd5.dir 00\sysdata.xmd

There are little squiggly horizontal lines where I have left a space before
the numeral one and other areas of the error message where I left a space. I
guess there is some way to type them but I do not know how.

Can someone please give me an idea what is going on as this problem is is
creating other problems on my system. Any help would be greatly appreciated.

Best regards,

Gordon
Click to expand...

Please read all the Info here on these Links provided then the whole
scenario will be fixable for you!.
Do you have one of these Video card: nvidia, Same for ATI video cards,
radeon graphics card.
If yes, you may not have the latest Video drivers and you just downloaded
the drivers from MS updates, which not recommended to do so. So, try and get
the latest drivers from these links:

Nvidia Geforce drivers downloads:
http://www.nvidia.com/content/drivers/drivers.asp

ATI Radeon drivers downloads:
http://ati.amd.com/support/driver.html

The computer may automatically restart, or you may receive a "serious error"
message or a Stop error message in Windows Server 2003, in Windows XP,
http://support.microsoft.com/?scid=kb;en-us;894278

Try to look in the Device Manager for the CD/DVD-ROM and see if it
malfunctioning.
Scan your computer fro malwares and Viruses by whatever software you have.
DMA Mode for ATA/ATAPI Devices in Windows XP
http://www.microsoft.com/whdc/device/storage/IDE-DMA.mspx
How to enable 48-bit Logical Block Addressing support for ATAPI disk drives
in Windows XP
http://support.microsoft.com/kb/303013

Example on the error code:
http://support.microsoft.com/kb/174232

Information about Event ID 51
http://support.microsoft.com/kb/244780/

How to troubleshoot event ID 9, event ID 11, and event ID 15 error messages
http://support.microsoft.com/kb/154690/

left hand column - (9F)
http://aumha.org/win5/kbestop.htm

To get more info about the Error in Event Viewer please double click the
Error message(X) to get a pop-up window contain info about the causer and you
can copy and paste this content in your next message.
I will make sure this machine is malware, Virus free before install/update
any drivers or software, run Disk CleanUp and defrag is safe mode.
Note: some users said by deleting the DUMP folder the error simply
disappeared, so delete the folder from the TEMP:
D:\DOCUME~1\Ami\LOCALS~1\Temp\[ ERf39e.dir00\Mini051607-02.dmp]
D:\DOCUME~1\Ami\LOCALS~1\Temp\[WERf39e.dir00\sysdata.xml]
Click to expand...

[ ERf39e.dir00\Mini051607-02.dmp] <= to be deleted.
HTH.
nass
Click to expand...
 
Back
Top