Error booting with new Abit NF7 AMD Mbd and drive from old P3 syst

[Guest]

Help needed. Both my P3 Mbds died. And I am trying to move my old IDE
drives over to a new Motherboard. I want to be able to use all the existing
programs.

But I can't get the HD to boot fully into W2k. I tried the repair/update
W2k from my CD, but all I get now is this error
*** STOP: 0x0000001E (0xParameter_1, 0xParameter_2, 0xParameter_3,
0xParameter_4)
KMODE EXCEPTION NOT HANDLED

A search of the MSDN KB shows this related link, but it refers to having to
call to get a hotfix???
http://support.microsoft.com/default.aspx?scid=kb;en-us;839427
What can I do?
tia

 

[Guest]

Info addition The exact error that I get includes the parameters
Stop: 0x0000001E (0xc0000005, 0xEB4617B6, 0x00000000, ox00000028)
XMODE_Exception_Not Handled

tia

 

[Guest]

Well sorry fot the typo's.
The error is "Kmode..." Not XMode...

And I have made some progress but not there yet. I replaced the CD-RW drive
with a straight 52X Cd drive, and took out the DVD-RW drive. Now after doing
the setup ... repair again... I can get to a setup sequence on the HD.

It goes part way thru the "initializing devices" screen then the screen goes
blank, a floppy access is attempted 5-6 times. then nothing more.. ???
ideas ???

Will try doing repair again and see if it gets any better. Any ideas what
is going on with this???

tia
Oldtimer

 

[Dave Patrick]

Hotfixes are always free.

How to Move a Windows Installation to Different Hardware
http://support.microsoft.com/?id=249694

HOW TO: Replace the Motherboard on a Computer That Is Running Windows
http://support.microsoft.com/?id=824125

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

| Help needed. Both my P3 Mbds died. And I am trying to move my old IDE
| drives over to a new Motherboard. I want to be able to use all the
existing
| programs.
|
| But I can't get the HD to boot fully into W2k. I tried the repair/update
| W2k from my CD, but all I get now is this error
| *** STOP: 0x0000001E (0xParameter_1, 0xParameter_2, 0xParameter_3,
| 0xParameter_4)
| KMODE EXCEPTION NOT HANDLED
|
| A search of the MSDN KB shows this related link, but it refers to having
to
| call to get a hotfix???
| http://support.microsoft.com/default.aspx?scid=kb;en-us;839427
| What can I do?
| tia