Error 53...The network path was not found.

R

Rich

This is a 4 Workstation 1 Server network with: One Win2000
Server running Active Directory, Two WinXP "Home"
Workstations, 2 Win98 Workstations. The network is running
the TCP/IP protocol and no others.
All connections were functioning normally until I applied
the latest service pack and critical updates to the Win
2000 server. I have checked security settings on the
server and all settings are normal, plain vanilla.
I can ping each Workstation and the Server from anywhere
on the network and I get an immediate reply from the
target TCP/IP address.
I can access the Win2000 Server and all shares on the
Server from any of the Workstations on the network.
I cannot access a shared HP 1200 Laser Printer attached to
an XP Workstation from any computer on the network
including the server. We had full access from all
Workstations before the Critical Updates were applied.
I cannot access any shares on any of the 4 Workstations
even though I can ping the Workstations from any other
Workstation and from the Server.
The error message in the Networking applet is as
above, "...You might not have permission to use this
network resource...The network path was not found". If I
use the "Cmd Line" to assess the situation: The "Net View"
command lists all the Workstations and the Server from
each XP machine.
However, "Net Use <\\computername>" produces the following
error message, "System error 53 has occurred. The network
path was not found" when attempting to access any
Workstation. However, when attempting to access the Server
from a Workstation, the "Net Use" command completes
successfully to any Server share.
Any ideas? I'm stumped!
Thanks.
 
C

Cary Shultz [MVP]

-----Original Message-----
This is a 4 Workstation 1 Server network with: One Win2000
Server running Active Directory, Two WinXP "Home"
Workstations, 2 Win98 Workstations. The network is running
the TCP/IP protocol and no others.
All connections were functioning normally until I applied
the latest service pack and critical updates to the Win
2000 server. I have checked security settings on the
server and all settings are normal, plain vanilla.
I can ping each Workstation and the Server from anywhere
on the network and I get an immediate reply from the
target TCP/IP address.
I can access the Win2000 Server and all shares on the
Server from any of the Workstations on the network.
I cannot access a shared HP 1200 Laser Printer attached to
an XP Workstation from any computer on the network
including the server. We had full access from all
Workstations before the Critical Updates were applied.
I cannot access any shares on any of the 4 Workstations
even though I can ping the Workstations from any other
Workstation and from the Server.
The error message in the Networking applet is as
above, "...You might not have permission to use this
network resource...The network path was not found". If I
use the "Cmd Line" to assess the situation: The "Net View"
command lists all the Workstations and the Server from
each XP machine.
However, "Net Use <\\computername>" produces the following
error message, "System error 53 has occurred. The network
path was not found" when attempting to access any
Workstation. However, when attempting to access the Server
from a Workstation, the "Net Use" command completes
successfully to any Server share.
Any ideas? I'm stumped!
Thanks.

.
Rich,

Error 53 almost always means "DNS Problem".

HTH,

Cary
 
N

Neil Ruston

I have seen this issue several times.

In both cases it indicated that the LM/NTLM method used by
the client was not supported by the server. e.g. the
client was attempting NTLM when the server supported
NTLMv2 (or Kerberos) only. In another example, LM hashes
had been removed from AD thus removing the option to
perform LM authentication. This caused a DOS based build
to fail, since it had alternate authentication method,
other than LM.

HTH,
Neil
 
L

ldsweet

This is a permissions issue. The share/resource needs to
have permissions for the logins removed/reset. I have a
multiple domain net with 4000+ users. Users must be
members of a group or a user on the share computer with
rights and or permissions to the share. The service pack
may have reset the originals.
Thanks
Larry
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top