You don'tas such need to access it or indeed attempt to remove it. Fill a
used cartridge with either the past favourite Windolene (USA Windex) a
window cleaning fluid which contains some ammonia, ( In the UK Mr Muscle a
shower cleaner works well) acting as a solvent for printing ink. Run a
cleaning (Priming) cycle a few times with this and print a few cleaner
pages.
This dislodges and frees up any encrusted ink and paper dust residues and
should beallthat is necessary to get you going again.
If you feel safer with the Pro cartridge flush and unclogging fluid it is
available here. http://www.aah-haa.com/cgi-bin/inky2/shop.cgi?item=5593
You may naturally alsohave to reset the cartridge chip with a resetter.
Tony
I do not recommend removing the printhead for cleaning purposes. In 99%
of the cases, it can be cleaned properly without removal and reduce the
risk of damage considerable.
If you email me I will send you a manual that explains the process, no
fee, no spam.
Art
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.
