DVD RW drive not working

J

James

Hi,

I've been trying to burn some files to a new blank dvd (tried others) but it
doesn't seem to be working.

I'm using Nero it chucks out an error saying it can encode it.

I used the Nero tools to read the drive and do a test on it and it shows up
as being a 2X which it is not I think its a 12X

Is it possible the drive is failed ?

What can I do to find out for sure ?

Thanks
 
J

James

James said:
Hi,

I've been trying to burn some files to a new blank dvd (tried others) but
it doesn't seem to be working.

I'm using Nero it chucks out an error saying it can encode it.

I used the Nero tools to read the drive and do a test on it and it shows
up as being a 2X which it is not I think its a 12X (not a 100%)

Is it possible the drive is failed ?

What can I do to find out for sure ?

Thanks

forgot to add: its a NEC DVD 3530A
 
J

Joel

James said:
forgot to add: its a NEC DVD 3530A

You don't say what you try to do besides trying to "burn" and it doesn't
work, and testing and it reports 2X instead of 12X etc..

- What do you try to burn? ISO? DATA?, Video? Audio?

- Trying to convert video to standard DVD-Video?

- Some media may say 12X but may not burn as 12X, and some does.

- If you want to test the bruner then you can try to use other to burn as
ISO to see if the burner is ok then go from there.

For the past few months, I have problem with newer Nero v7.x and similar
problem with Nero v8 too.
 
K

kony

forgot to add: its a NEC DVD 3530A

This seems a logical, Nero problem not a drive problem.
Have you tried other tasks burning files to this drive?

Are you trying to make a video DVD through Nero's choices,
but made out of non-video files?

In Nero try choosing "image recorder" instead of this drive
then do the same operation. See if it works to create the
*.nrg file or if it produces the same error. If it finishes
producing the file without error, next start over and try to
burn that image to a disc... I'm not suggesting you do it
this way for every disc you make, just as a test to see
where the process goes awry.
 
B

bratsos22

Is many reasons for that trouble, the most of them is to have noise
your "eye" of laser DVDrec, just open the device and clear the "eye"
with care.

Another reason is the version of NERO. In one computer where i have
before his working correcty, only the version 6.6 of nero enteprise.
Finally check your DVDrec device in one another "CLEAR" computer. If
work correct the problem is in your computer. (Software or hardware,
like error connect, corrupt
cable.). Otherwise is time for new DVDrecorder :(
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top