dual adapters

  • Thread starter Thread starter Alan
  • Start date Start date
A

Alan

Can anyone tell me how to configure dual ethernet adpaters.
Would like one for in-bound traffic and one for outout-
bound.

ThankS1
 
Natively there isn't a good way to do that, but if your nics support a
teaming software then you can team the nics. Most newer (higher end) Intel
Chipset nics do support some type of teaming. You can team them for load
balancing or fault tolerant mode.

If you team for Load Balancing, you will accomplish the same concept to what
you are looking for.

But in most cases 1 nic is fine. Your nics are usually not the actual
bottleneck on a system with performance problems. :) Hope that helps some.
:)
--

Brian Oakes

This posting is provided "AS IS" with no warranties and confers no rights.
Please reply to the newsgroup so that others may benefit.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads


Back
Top