C
Calum
I have a new PC with a DVD multi burner (LG 'GSA-4040B')
the problem i have is whenever i insert a DVD RW disc (+
or -) windows pops up and says what do you want to do
with this disk 'Blank CD' and it does no recognise any
files on it. I have updated the firmware with no effect
and now after installing SP2 have the same pop up but my
DVD burning software Astonsoft Deepburner will now burn
to DVD-RW. Windows will read it as a DVD-Rom once it is
done. I still have no luck with DVD+RW (i am not sure
about -/+r or ram) i have tried the trick at
http://support.microsoft.com/default.aspx?kbid=316529,
but everything was set right. One thing I did notice was
that the drive is listed as 'Device type: DVD/CD-ROM'
and 'Manufacturer: (standard CD-ROM drive)' in Device
manager properties.
the problem i have is whenever i insert a DVD RW disc (+
or -) windows pops up and says what do you want to do
with this disk 'Blank CD' and it does no recognise any
files on it. I have updated the firmware with no effect
and now after installing SP2 have the same pop up but my
DVD burning software Astonsoft Deepburner will now burn
to DVD-RW. Windows will read it as a DVD-Rom once it is
done. I still have no luck with DVD+RW (i am not sure
about -/+r or ram) i have tried the trick at
http://support.microsoft.com/default.aspx?kbid=316529,
but everything was set right. One thing I did notice was
that the drive is listed as 'Device type: DVD/CD-ROM'
and 'Manufacturer: (standard CD-ROM drive)' in Device
manager properties.