Document not saved in Excel 97

  • Thread starter Thread starter Dexter Southerland
  • Start date Start date
D

Dexter Southerland

Hi,
Thanks in advance for your help. I have a new workstation with Windows XP
pro sp1 and have installed Office 97/Excel 97 SR-2. When I try to save a
excel file with or without changes. that had been created before new
workstation. I get Document not Saved. The file/files are on a network drive
and I have full permission to them.
I have tried the same from a Win 98se pc and it works . Save as does not
work either.
Any Ideas?
Thanks
Dexter
 
Hi Dexter..........

Sounds like the same results I used to get when we had LOTS of network
troubles at work on my drop.......others would work ok, but mine, everytime
I opened a network Excel file, and kept it open for any length of time, I
was unable to save it because somewhere in there we had a network
hit........and once that happens, there's no going back.......I got to where
I saved almost every record entered in order not to lose a lot of work.
Have you ticked off anybody in the MIS dept lately <g>?
If you have to have the file open all day, you could open it and save-as
right away to your C drive and at the end of the day put it back on the
network, but that's a pain. But if you get to where that's all that works,
you can set up a couple macros to do the saving for you.
There's no good answer, save getting the network running good.


Vaya con Dios,
Chuck, CABGx3
 
Thanks,
Do not think it is this. Same PC new OS.
Dexter
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Back
Top