Disk Boot Failure

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I am trying to get my desktop to start up and I keep getting a disk boot
failure error before then it shows a DMI pool data then boot from cd then
says disk boot failure ,insert system disk and press enter. My question is
how do i obtain a system disk? and what is causing this problems.

Thanks Phil
 
Phil said:
I am trying to get my desktop to start up and I keep getting a disk boot
failure error before then it shows a DMI pool data then boot from cd then
says disk boot failure ,insert system disk and press enter. My question is
how do i obtain a system disk? and what is causing this problems.

Thanks Phil
Click to expand...
A system disk is one which has an operating system on it.
You create one when you install an operating system such as XP.
You insert the XP CD into your CD drive, set the BIOS to boot the CD first,
and proceed with the installation.

However, this message seems to indicate that there is a problem with the
disk other than not having an operating system to find.

One possibility is that the master boot record is bad.

Jim
 
Hi Jim sounds like a damaged disk. Put your XP disk in and try a re install,
you may need a new drive so check its under warranty first
 
|I am trying to get my desktop to start up and I keep getting a disk boot
| failure error before then it shows a DMI pool data then boot from cd then
| says disk boot failure ,insert system disk and press enter. My question is
| how do i obtain a system disk? and what is causing this problems.
|
| Thanks Phil

You haven't left a floppy in the drive have you?
 
Back
Top