different mainboard & XP

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hi,


I installed a windows xp professinal and then changed my mainboard with
different chipset.This time windows didnt load and I had to install
windows
again on this mainboard(different chipset).
This is very important when you want to change a mainboard with
different
chipset (actually ,moving hard disk to different motherboard)in your
work
place and you lose your previous setting on windows.
How can I solve this problem?
I'll appereciate if you send me some useful information.

Thank you

arian
 
arian said:
Hi,


I installed a windows xp professinal and then changed my mainboard with
different chipset.This time windows didnt load and I had to install
windows
again on this mainboard(different chipset).
This is very important when you want to change a mainboard with
different
chipset (actually ,moving hard disk to different motherboard)in your
work
place and you lose your previous setting on windows.
How can I solve this problem?
I'll appereciate if you send me some useful information.

Thank you

arian

How can you solve what problem? If you move the hard drive or change the
motherboard, you usually have to do a repair install, but you've already
figured that out.
 
arian said:
Hi,


I installed a windows xp professinal and then changed my mainboard
with different chipset.This time windows didnt load and I had to
install windows
again on this mainboard(different chipset).
This is very important when you want to change a mainboard with
different
chipset (actually ,moving hard disk to different motherboard)in your
work
place and you lose your previous setting on windows.
How can I solve this problem?
I'll appereciate if you send me some useful information.

Thank you

arian

Click on the link below, or copy and paste the link into the address box
if using the web based newsgroup.
Move XP to new hardware.
http://michaelstevenstech.com/moving_xp.html
--
Michael Stevens MS-MVP XP
(e-mail address removed)
http://michaelstevenstech.com
For a better newsgroup experience. Setup a newsreader.
http://michaelstevenstech.com/outlookexpressnewreader.htm
 
arian said:
Hi,


I installed a windows xp professinal and then changed my mainboard with
different chipset.This time windows didnt load and I had to install
windows
again on this mainboard(different chipset).
This is very important when you want to change a mainboard with
different
chipset (actually ,moving hard disk to different motherboard)in your
work
place and you lose your previous setting on windows.
How can I solve this problem?



Normally, and assuming a retail license (many OEM installations and
licenses, especially those of the branded, BIOS-locked variety, are not
transferable to a new motherboard - check yours *before* starting),
unless the new motherboard is virtually identical (same chipset, same
IDE controllers, same BIOS version, etc.) to the one on which the WinXP
installation was originally performed, you'll need to perform a repair
(a.k.a. in-place upgrade) installation, at the very least.

How to Perform an In-Place Upgrade of Windows XP
http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341

The "why" is quite simple, really, and has nothing to do with
licensing issues, per se; it's a purely technical matter, at this point.
You've pulled the proverbial hardware rug out from under the OS. (If
you don't like -- or get -- the rug analogy, think of it as picking up a
Cape Cod style home and then setting it down onto a Ranch style
foundation. It just isn't going to fit.) WinXP, like Win2K before it,
is not nearly as "promiscuous" as Win9x when it comes to accepting any
old hardware configuration you throw at it. On installation it
"tailors" itself to the specific hardware found. This is one of the
reasons that the entire WinNT/2K/XP OS family is so much more stable
than the Win9x group.

As always when undertaking such a significant change, back up any
important data before starting.

This will also probably require re-activation, unless you have a
Volume Licensed version of WinXP Pro installed. If it's been more than
120 days since you last activated that specific Product Key, you'll most
likely be able to activate via the Internet without problem. If it's
been less, you might have to make a 5 minute phone call.

--

Bruce Chambers

Help us help you:



You can have peace. Or you can have freedom. Don't ever count on having
both at once. - RAH
 
I've always just automatically done the sysprep w/o exploring alternatives.
since my changes are usually just a HD this was overkill sometimes.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Back
Top