DHCP for VPN clients

  • Thread starter Thread starter Bruce
  • Start date Start date
B

Bruce

How would I configure my DHCP server to give out address's
to remote VPN Clients
 
In fact, you configure that in RRAS. There you can set that RAS-clients
should listen to your server-IP and get an IP from your DHCP-server.

Marina
 
Hello Bruce,

There is no special configuration within DHCP to allow VPN clients to obtain
addresses.
The configuration is within RRAS as RRAS will be configured to obtain
addresses from DHCP.

Please look at the following article that talks about VPN Server
configuration.

323441 HOW TO: Install and Configure a Virtual Private Network Server in
http://support.microsoft.com/?id=323441

--
Regards,
Mohanchand Koduri [MSFT]

This posting is provided "AS IS" with no warranties, and confers no rights.
OR
If you wish to include a script sample in your post please add "Use of
included
script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm"
 
You must log in or register to reply here.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

VPN vs. VLAN 5
VPN DHCP and Name Resolution 3
OpenVPN interface not configuring correctly 1
VPN server without domain controller 0
RRAS and DHCP 4
Some Windows Clients Use Wrong Subnet 3
DHCP VPN Question 4
Win2k DC VPN out doesn't work 2

Back
Top