default VPN routing help needed

[Guest]

I have a Windows 2003 RRAS server set up behind a LinkSys ADSL router. When
I connect to the server remotely from my XP system the default route on my
machine gets set to the IP address of the VPN connection. As a result, all
my traffic to the net goes through my 384kbps uplink instead of out the
100Mbit local LAN.

What can I do on the client side to make it so the lowest metric default
route is my local LAN instead of the VPN connection?

 

[Robert L [MS-MVP]]

You can disable use default gateway in remote network.

routing issues on vpn Can't access the internal server when remote client establishes VPN Can't access the Internet while using VPN Can't access the remote network after ...
www.chicagotech.net/routingissuesonvpn.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
I have a Windows 2003 RRAS server set up behind a LinkSys ADSL router. When
I connect to the server remotely from my XP system the default route on my
machine gets set to the IP address of the VPN connection. As a result, all
my traffic to the net goes through my 384kbps uplink instead of out the
100Mbit local LAN.

What can I do on the client side to make it so the lowest metric default
route is my local LAN instead of the VPN connection?