Colour Quality broken.

[Guest]

I am not sure if it is a virus or it is just something wrong with two of our
computers, and the same thing just happened to happen on the same time. One
computer was a Windows ME computer but we have recently installed Windows XP
as it is a more secure system, and the other is a Windows ME laptop and was
next in the que to be upgraded to Windows XP.

On the XP machine I was installing the Windows updates, and it asked me to
restart. When I restarted all the monitor settings had gone wrong. It was in
a 640x400 i think it was for screen resolution and then Low at 8bit for
screen quality. When I right-click on the desktop and then click on
properties, go to settings, and here this is where you should change the
screen settings. When I changed te screen resolution back to 800x600 and 64
bit high quality, hit apply noting happens and sometimes it restarts but
still nothing happpens. Somehow whilst trying to fix it we managed to get it
to a rediculously small setting that before the monitor didnt even support.
it was so small you could bairly see which setting you were in, and without
knowing Windows we ad no chance. We changed moniters from another computer
that was working and then we got it back to a 640x400 screen resolution.

I'm not sure how as I was out of the room at this point but we managed to
get the computer back to a 800x600 screen resolution. When ever I go to
properties and then settings though and try to change the screen settings
nothing seems to work, and again sometimes it restarts.

With the laptop there was a similar problem. When restarting all the screen
settings were messed up. It was at a 640x400 screen setting and 8bit screen
quality. The real bugger with this one is tht it has rejected all forms of
mouse's. The built in mouse on the laptop, a PS2 mouse and USB mouse all dont
work. Even when I transfer the files from a working computer for the mouse it
still doesnt want to work.

The laptop like the computer when you go to the display properties via the
control panel and then settings, when you go to a 800x600 and 64bit screen
quality and then click on OK, nothing happens.

Any suggestions?
Thanks
Alastair

 

[Shenan Stanley]

I am not sure if it is a virus or it is just something wrong with
two of our computers, and the same thing just happened to happen on
the same time. One computer was a Windows ME computer but we have
recently installed Windows XP as it is a more secure system, and
the other is a Windows ME laptop and was next in the que to be
upgraded to Windows XP.

On the XP machine I was installing the Windows updates, and it
asked me to restart. When I restarted all the monitor settings had
gone wrong. It was in a 640x400 i think it was for screen
resolution and then Low at 8bit for screen quality. When I
right-click on the desktop and then click on properties, go to
settings, and here this is where you should change the screen
settings. When I changed te screen resolution back to 800x600 and
64 bit high quality, hit apply noting happens and sometimes it
restarts but still nothing happpens. Somehow whilst trying to fix
it we managed to get it to a rediculously small setting that before
the monitor didnt even support. it was so small you could bairly
see which setting you were in, and without knowing Windows we ad no
chance. We changed moniters from another computer that was working
and then we got it back to a 640x400 screen resolution.

I'm not sure how as I was out of the room at this point but we
managed to get the computer back to a 800x600 screen resolution.
When ever I go to properties and then settings though and try to
change the screen settings nothing seems to work, and again
sometimes it restarts.

With the laptop there was a similar problem. When restarting all
the screen settings were messed up. It was at a 640x400 screen
setting and 8bit screen quality. The real bugger with this one is
tht it has rejected all forms of mouse's. The built in mouse on the
laptop, a PS2 mouse and USB mouse all dont work. Even when I
transfer the files from a working computer for the mouse it still
doesnt want to work.

The laptop like the computer when you go to the display properties
via the control panel and then settings, when you go to a 800x600
and 64bit screen quality and then click on OK, nothing happens.

Any suggestions?

Update the video card driver for each machine from the corresponding
manufacturer's web site.. Do not get the Microsoft Driver. On the laptop -
system restore then update the video card driver as well as the mainboard
chipset driver.

Also - in the future - DO NOT MULTIPOST. Cross-Post if you feel your
question is relevant to more than one newsgroup - but multiposting is, at
the very least, annoying to those who might answer your question then find
it UNREAD in another one or more newsgroups.. Not to mention that if you
cross-post - their answer may have been carried over (if they configure
their newsreader to do this or choose to respond to all groups) to all
groups and you only have to check back in ONE place instead of the many you
multiposted to.

 

[Guest]

I would multi post but I dont know how to. Please advise as it asks for the
full USENET designation and I am not sure what to put in there as I am fairly
new with the newsgroups.

What do you put in
Alastair

 

[Shenan Stanley]

I am not sure if it is a virus or it is just something wrong with
two of our computers, and the same thing just happened to happen
on the same time. One computer was a Windows ME computer but we
have recently installed Windows XP as it is a more secure system,
and the other is a Windows ME laptop and was next in the que to be
upgraded to Windows XP.

On the XP machine I was installing the Windows updates, and it
asked me to restart. When I restarted all the monitor settings had
gone wrong. It was in a 640x400 i think it was for screen
resolution and then Low at 8bit for screen quality. When I
right-click on the desktop and then click on properties, go to
settings, and here this is where you should change the screen
settings. When I changed te screen resolution back to 800x600 and
64 bit high quality, hit apply noting happens and sometimes it
restarts but still nothing happpens. Somehow whilst trying to fix
it we managed to get it to a rediculously small setting that
before the monitor didnt even support. it was so small you could
bairly see which setting you were in, and without knowing Windows
we ad no chance. We changed moniters from another computer that
was working and then we got it back to a 640x400 screen
resolution.

I'm not sure how as I was out of the room at this point but we
managed to get the computer back to a 800x600 screen resolution.
When ever I go to properties and then settings though and try to
change the screen settings nothing seems to work, and again
sometimes it restarts.

With the laptop there was a similar problem. When restarting all
the screen settings were messed up. It was at a 640x400 screen
setting and 8bit screen quality. The real bugger with this one is
tht it has rejected all forms of mouse's. The built in mouse on
the laptop, a PS2 mouse and USB mouse all dont work. Even when I
transfer the files from a working computer for the mouse it still
doesnt want to work.

The laptop like the computer when you go to the display properties
via the control panel and then settings, when you go to a 800x600
and 64bit screen quality and then click on OK, nothing happens.

Any suggestions?

Update the video card driver for each machine from the
corresponding manufacturer's web site.. Do not get the Microsoft
Driver. On the laptop - system restore then update the video card
driver as well as the mainboard chipset driver.

Also - in the future - DO NOT MULTIPOST. Cross-Post if you feel
your question is relevant to more than one newsgroup - but
multiposting is, at the very least, annoying to those who might
answer your question then find it UNREAD in another one or more
newsgroups.. Not to mention that if you cross-post - their answer
may have been carried over (if they configure their newsreader to
do this or choose to respond to all groups) to all groups and you
only have to check back in ONE place instead of the many you
multiposted to.

I would multi post but I dont know how to. Please advise as it asks
for the full USENET designation and I am not sure what to put in
there as I am fairly new with the newsgroups.

What do you put in

"Cross-Post. Sending a single post to more than one newsgroup at the same
time."

Fairly simple - even using that horrible web interface you are.
http://www.microsoft.com/wn3/locales/help/help_en-us.htm

To post in more than one discussion group, type the additional discussion
groups you want to post to in the Cross-post to these discussion groups box.
Use a comma (,) between discussion group names.

The full group name usually (in these groups) starts with "micorosft" and
can be located by looking at the link location (not the link itself, but
where it takes you) on the left side of the screen when using the Web
Interface.. For example..

Windows XP Customizing links to:
http://www.microsoft.com/windowsxp/...soft.public.windowsxp.customize&lang=en&cr=US

Where the full name of the group could be typed in as:
microsoft.public.windowsxp.customize

You *don't* normally need to do this. Don't know where your question
belongs? Post it once anyway.. You'll either get an answer, a post telling
you where to post or no answer. If the latter, post it again in a few days
elsewhere.

You'd be better off using a newsreader.