clients and scopes

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

if I have one physical LAN with 4 subnets and 4 scopes for each on the DHCP
server, say, one is accounting, one is research, one is manufacturing and one
is finance. How does the DHCP server know what scope of addresses to give
which set of clients in each department. When a client in research needs an
address what keeps it from getting an address from the subnet in research?
 
When the LAN Router forwards the DHCP Queries, the router includes in the
packets the information the DHCP Server needs to make the right decision.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp
 
no router between departments just switches. And what "information" can you
be more specific? I thought all I'd need would be an bootp router or comuter
with edited registry. How???? I'm on the edge of a break through here, don't
leave me hangin'.

Steve

Phillip Windell said:
When the LAN Router forwards the DHCP Queries, the router includes in the
packets the information the DHCP Server needs to make the right decision.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp
-----------------------------------------------------


Stevef said:
if I have one physical LAN with 4 subnets and 4 scopes for each on the DHCP
server, say, one is accounting, one is research, one is manufacturing and one
is finance. How does the DHCP server know what scope of addresses to give
which set of clients in each department. When a client in research needs an
address what keeps it from getting an address from the subnet in research?
 
Stevef said:
no router between departments just switches.

You cannot do "routing" with switches, you have a router "somewhere".
Departments are irrelevant. This is a Layer3 thing, it has to do with IP
Networks/Subnets,...it doesn't know anything about "Departments"
And what "information" can you be more specific?

Heck I don't know. It is not something that you "do" anything with. You just
set the Router to forward the DHCP Queries and then you get out of the way
and leave it alone.
I thought all I'd need would be an bootp router or comuter
with edited registry.

You use a LAN Router,...a "real" LAN Router". Hacking the registry on some
poor innocent machine isnt' going to accomplish anything. Using the RRAS
Service on a Win2k or Win2k3 Server OS may be able to do it, but I have
never done it.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp
-----------------------------------------------------
 
Back
Top