CDROM driver not loading

[Dee]

Hello,

I have attached an IDE CDROM drive. It is recognized in the BIOS. I have a
component already installed in target analyzer. It is 'CD-ROM drive (force
CDDA accurate)'. In the XPe image the cd-rom drive is recognized correctly
as a 'Toshiba CD-ROM XM-5702b' but is accompanied by a yellow exclamation
and has the error: Windows cannot load the device driver for this hardware.
The driver may be corrupted or missing - code 39.

I have tried uninstalling it and reloading a generic cd-rom driver in TA.
This did not work. Does anyone have any ideas.

Thanks
Dee

 

[KM]

Dee,

Code 39 means the driver may be corrupted or missing.
http://www.microsoft.com/resources/...Windows/XP/all/reskit/en-us/prjk_dec_lgsc.asp

Make sure you've got the driver built in your image. If the driver is not in
XPe database, you will have to componentize it.

To analyze why the driver did not get installed, please refer to
\Windows\SetupApi.log file.

KM

PS. By TA below you probably meant TD?

 

[Guest]

Yes, I meant TD -target designer.

Dee,

Code 39 means the driver may be corrupted or missing.
http://www.microsoft.com/resources/...Windows/XP/all/reskit/en-us/prjk_dec_lgsc.asp

Make sure you've got the driver built in your image. If the driver is not in
XPe database, you will have to componentize it.

To analyze why the driver did not get installed, please refer to
\Windows\SetupApi.log file.

KM

PS. By TA below you probably meant TD?

 

[Guest]

Well, I got it to work and just wanted to write what I did for others. I
deleted the current cdrom component in my image. Replaced it with a generic
cdrom component (there are many). I also added 'CDFS' - but i don't think
this is relevant to the problem. Anyway it worked after that.