CD-ROM firmware peoblem!

V

Valentin Stanev

I have a Teac cd-540E cd-rom drive. It had a firmware version 1.0a when I
bought it. After I updated the firmware with version 3.0a, which I obtained
from the official Teac site, the drive tray ejects after a very long delay
(15sec) when the eject command is called by the OS or another software, but
not by the eject/close button
of the drive. Is it possible to fix that by updating the firmware again? Can
that damage the drive ?

Thanks in advance.

Valentin
 
C

Crusty \(-: Old B@stard :-\)

You are asking a very technical (device related) question here, instead of
going to the manufacturer of the hardware because.....?

It won't damage the drive (if you do it correctly), but only Teac can tell
you if it will solve your problem!
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

DVD-RAM Drive Displays As CD Drive In My Computer 16
TEAC CD-516KB CD-R CD-RW format and burn errors 1
Samsung SH-S223F treated as CD-RW, can't recognize blank DVD media 9
Firmware drivers with LITE-ON LTR-16102B CD-RW CD-Rom 2
How to Flash Firmware on Secondary CD-ROM/RW Drive 3
CD ROM 3
Cd/dvd cause reboot 2
cd-rom reads a disc only once after start-up 2

Top