can't send e.mail using Windows Live

[Can't send e.mails]

I'm receiving the following message:

--------------------
The message could not be sent. The authentication setting might not be
correct for your outgoing e-mail [SMTP] server. For help solving this
problem, go to Help, search for "Troubleshoot Windows Mail", and read the
"I'm having problems sending e-mail" section. If you need help determining
the proper server settings, please contact your e-mail service provider.

The rejected e-mail address was '(e-mail address removed)'. Subject 'mensaje
de prueba', Account: 'mail.tonymojena.com', Server: 'mail.tonymojena.com',
Protocol: SMTP, Server Response: '550 relay not permitted', Port: 25,
Secure(SSL): No, Server Error: 550, Error Number: 0x800CCC79

 

[Earley]

I am having the same problem I can send out using a web based email but not
through Windows Live. It kicks the email into the Outbox and then chokes when
asked to send it from the Outbox. I have Vista. Earley

 

[slk759]

Please post your error message (don't assume it is the same as the original
poster's) - if you don't see an error message, click the Sync button while
the message is in your Outbox. That should produce one.

I am having the same problem I can send out using a web based email but
not
through Windows Live. It kicks the email into the Outbox and then chokes
when
asked to send it from the Outbox. I have Vista. Earley

I'm receiving the following message:

--------------------
The message could not be sent. The authentication setting might not be
correct for your outgoing e-mail [SMTP] server. For help solving this
problem, go to Help, search for "Troubleshoot Windows Mail", and read the
"I'm having problems sending e-mail" section. If you need help
determining
the proper server settings, please contact your e-mail service provider.

The rejected e-mail address was '(e-mail address removed)'. Subject
'mensaje
de prueba', Account: 'mail.tonymojena.com', Server:
'mail.tonymojena.com',
Protocol: SMTP, Server Response: '550 relay not permitted', Port: 25,
Secure(SSL): No, Server Error: 550, Error Number: 0x800CCC79

 

[Gary VanderMolen \(MVP\)]

Make sure you have send authentication enabled.
Go to Tools, Accounts, select that account, Properties, Servers.
Enable the "My server requires authentication" option.

 

[Gary VanderMolen \(MVP\)]

Define what you mean by "chokes". Sorry, we can't diagnose based
on colorful phrases.
Right-click on your error message, copy, then paste it into a reply here.

 

[Lynn]

I am having the same problem. When I called my wowway they said all my
settings were good and to contact Microsoft. I don't know how to do that.

I am having the same problem I can send out using a web based email but not
through Windows Live. It kicks the email into the Outbox and then chokes when
asked to send it from the Outbox. I have Vista. Earley

I'm receiving the following message:

--------------------
The message could not be sent. The authentication setting might not be
correct for your outgoing e-mail [SMTP] server. For help solving this
problem, go to Help, search for "Troubleshoot Windows Mail", and read the
"I'm having problems sending e-mail" section. If you need help determining
the proper server settings, please contact your e-mail service provider.

The rejected e-mail address was '(e-mail address removed)'. Subject 'mensaje
de prueba', Account: 'mail.tonymojena.com', Server: 'mail.tonymojena.com',
Protocol: SMTP, Server Response: '550 relay not permitted', Port: 25,
Secure(SSL): No, Server Error: 550, Error Number: 0x800CCC79

 

[Everydayglam]

I am having the same problem and can't find any answers.

 

[Gary VanderMolen \(MVP\)]

Do you get an error message when you try to send or receive? If so,
right-click on your error message, copy, then paste it into a reply here.
We can't do much troubleshooting without the complete error message.

 

[Gary VanderMolen \(MVP\)]

Do you get an error message when you try to send or receive? If so,
right-click on your error message, copy, then paste it into a reply here.
We can't do much troubleshooting without the complete error message.