Can't publish using FP 03 but have done so before

[Guest]

I have a couple of websites hosted on different servers. I cannot republish
any of them. They have all been published before, they all accept FP
extensions.

When I click the "OK" buttom on the "remote website properties" dialogue box
it immeadiately comes up with an "unable to open www........etc and then
lists 4 possible causes

1.Front page server extensions not installed....they are, i've used them
before

2.The webserver may be temporairily out of service.. I've checked & they
wern't

3.Proxy settings may be incorrect.. I have changed from dialup to cable
recently as well as set up a wireless network & I am wondering if either of
these may have effected some settings?? Any suggestions on how to check &
confirm they are correct would help please..

4.An error may have occured in the webserver? Wouldn't have thought the
different servers could all be faulty at the one time.. but don't really know
what I am talking about here, or how to check..

I have run the FP repair program which has not made any difference and
reloaded software

Your help would be appreciated

 

[=?Windows-1252?Q?Rob_Giordano_\=28aka:_Crash_Gordo]

Firewalls?



| I have a couple of websites hosted on different servers. I cannot republish
| any of them. They have all been published before, they all accept FP
| extensions.
|
| When I click the "OK" buttom on the "remote website properties" dialogue box
| it immeadiately comes up with an "unable to open www........etc and then
| lists 4 possible causes
|
| 1.Front page server extensions not installed....they are, i've used them
| before
|
| 2.The webserver may be temporairily out of service.. I've checked & they
| wern't
|
| 3.Proxy settings may be incorrect.. I have changed from dialup to cable
| recently as well as set up a wireless network & I am wondering if either of
| these may have effected some settings?? Any suggestions on how to check &
| confirm they are correct would help please..
|
| 4.An error may have occured in the webserver? Wouldn't have thought the
| different servers could all be faulty at the one time.. but don't really know
| what I am talking about here, or how to check..
|
| I have run the FP repair program which has not made any difference and
| reloaded software
|
| Your help would be appreciated
|

 

[Wes]

SP2?

 

[Guest]

Have disabled the firewall and I haven't loaded Service Pack 2

Regards
Greg

 

[Tom Pepper Willett]

It could very well be the configuration of your wireless network.

--
===
Tom "Pepper" Willett
Microsoft MVP - FrontPage
---
About FrontPage 2003:
http://office.microsoft.com/home/office.aspx?assetid=FX01085802
FrontPage 2003 Product Information:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
Understanding FrontPage:
http://msdn.microsoft.com/office/understanding/frontpage/
FrontPage 2002 Server Extensions Support Center:
http://support.microsoft.com/default.aspx?scid=fh;en-us;fp10se
===
| Have disabled the firewall and I haven't loaded Service Pack 2
|
| Regards
| Greg
|
| "Wes" wrote:
|
| > SP2?
| >
| > | > >I have a couple of websites hosted on different servers. I cannot
republish
| > > any of them. They have all been published before, they all accept FP
| > > extensions.
| > >
| > > When I click the "OK" buttom on the "remote website properties"
dialogue
| > > box
| > > it immeadiately comes up with an "unable to open www........etc and
then
| > > lists 4 possible causes
| > >
| > > 1.Front page server extensions not installed....they are, i've used
them
| > > before
| > >
| > > 2.The webserver may be temporairily out of service.. I've checked &
they
| > > wern't
| > >
| > > 3.Proxy settings may be incorrect.. I have changed from dialup to
cable
| > > recently as well as set up a wireless network & I am wondering if
either
| > > of
| > > these may have effected some settings?? Any suggestions on how to
check &
| > > confirm they are correct would help please..
| > >
| > > 4.An error may have occured in the webserver? Wouldn't have thought
the
| > > different servers could all be faulty at the one time.. but don't
really
| > > know
| > > what I am talking about here, or how to check..
| > >
| > > I have run the FP repair program which has not made any difference and
| > > reloaded software
| > >
| > > Your help would be appreciated
| > >
| >
| >
| >

 

[Guest]

Hi Tom

How would I go about confirming if this was the problem?
The manufactuer of the network cards has a help desk I guess that may be a
good place to start??

Greg

 

[Thomas A. Rowe]

One way is to use a dial-up connection, if available, instead of the wireless.

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================