R
Randy
Hello Everyone
We have an old Pentium2 SCSI bus running W2K it needed an
additional hard drive added to it. After configuring the
HD and installing and booting the machine the BIOS reports
two HD's one at SCSI ID 0 and SCSI ID 1, no errors are
reported. After Windows comes up and I login I run Start-
My Computer the additional HD does not show up for you to
be able to format the drive for use. Any help will be
greatly appreicated.
Thanks Randy
We have an old Pentium2 SCSI bus running W2K it needed an
additional hard drive added to it. After configuring the
HD and installing and booting the machine the BIOS reports
two HD's one at SCSI ID 0 and SCSI ID 1, no errors are
reported. After Windows comes up and I login I run Start-
for the HD this reports two HD's. However when you go toSettings->Control Panel->System->Device Manager to check
My Computer the additional HD does not show up for you to
be able to format the drive for use. Any help will be
greatly appreicated.
Thanks Randy