Can't detect a Display card

[Guest]

I had succeed to boot up a XP Embedded early, but when I change my Display Card to ASUS 9180 Magic(MX440), it got a problem.

First, I am using the default driver that provided by XP Embedded SP1(MX440 with 8x), although I can succeed to create a image(no error message), but when I boot in this XP Embedded, it can’t detect the Display Card(See in the Device Manager)

So in this case, I am trying to use Component Designer by creating a component from the .inf file(Display Driver) that provided by Asus. But still got the same problem, I can create the image, I can boot up the image, but just can’t detect any Display Card

When I check for the fba.log, there got some error message, this is the error Message show in the fba.log
15:57:01 -[StartDelete: Skipping] E:\WINDOWS\System32\nvrsar.dll
15:57:01 -[StartDelete: Skipping] E:\WINDOWS\System32\nvwrsar.dl
…â€
15:57:07 -[PnpEnumThread: InstallDevice] SetupDiCallClassInstaller Error: 0x2, Device: ASUS V9180 Magic (R2.00A) V52.16

And I also have trying install the driver in XP Embedded, but still failed

And Finally, please don’t mind for my broken English^

Thanks
KKPoo

 

[Slobodan Brcin \(eMVP\)]

Run dependency walker on XPe and use it for all NVIDIA files to see if you
have missing file dependencies that are preventing some files from starting.

Regards,
Slobodan

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Have an opinion on the effectiveness of Microsoft Embedded newsgroups? Tell
Microsoft!
https://www.windowsembeddedeval.com/community/newsgroups
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

I had succeed to boot up a XP Embedded early, but when I change my Display

Card to ASUS 9180 Magic(MX440), it got a problem..

First, I am using the default driver that provided by XP Embedded

SP1(MX440 with 8x), although I can succeed to create a image(no error
message), but when I boot in this XP Embedded, it can't detect the Display
Card(See in the Device Manager).

So in this case, I am trying to use Component Designer by creating a

component from the .inf file(Display Driver) that provided by Asus. But
still got the same problem, I can create the image, I can boot up the image,
but just can't detect any Display Card.

When I check for the fba.log, there got some error message, this is the

error Message show in the fba.log:

15:57:01 -[StartDelete: Skipping] E:\WINDOWS\System32\nvrsar.dll
15:57:01 -[StartDelete: Skipping] E:\WINDOWS\System32\nvwrsar.dll
..
15:57:07 -[PnpEnumThread: InstallDevice] SetupDiCallClassInstaller Error:

0x2, Device: ASUS V9180 Magic (R2.00A) V52.16.