Can share only in one direction!

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Configuration:

Three PCs each running XP SP2
Local network with Router for net access

Background:

One PC is new. I put this on the net, set up everything and was able to
share folders and use them on one of the other computers. Then, I took the PC
to work and added it to a domain (like I had done with the other PCs),
installed more S/W, Virus scan, and security agent, etc. so that I can VPN
into work from home.

Issue:

When reinstalled into my home network. Both of the older PCs CANNOT see the
share on this new machine. However, they can see shares between each other
and the new computer can see the shares on the older computers.

I tried numerous things, like switching from Simple File Sharing to custom
and searching the posts here and I'm stuck. I can't get it to work. I even
turned off the security agent running on each machine.

The message I see, when I try to use a share is "\\pcm-xp3\Paul is not
accessible. You might not have permissions to use this network resource.
Contact the administrator of this server to find out if you have access
permissions. Not enough server storage is available to process this command.".

I'm logged into both machines using the local account. I'm admin, and the
passwords are the same. Under share permissions I made sure I had
permissions, as do "Users" and under security I made sure "Everyone" had full
control permissions.

Below is the CDIAG output from the machine that is providing the share that
cannot be accessed (PCM-XP3) and then for one of the machines that is trying
to access the share (PCM-XP01). I disconnected the third system from the
network, just to simplify the tests.

Any advice would be greatly appreciated! I've been banging my head against
the monitor for two days now :^(


CDiagnosis V1.33
Start diagnosis for PCM-XP3

Enumerate Shares


Share name Resource Remark

-------------------------------------------------------------------------------
C$ C:\ Default share

print$ C:\WINDOWS\system32\spool\drivers
Printer Drivers

ADMIN$ C:\WINDOWS Remote Admin

IPC$ Remote IPC

Paul C:\Paul
SharedDocs C:\DOCUMENTS AND SETTINGS\ALL USERS\DOCUMENTS

hpdeskje USB001 Spooled hp deskjet 950c series

The command completed successfully.


Adhoc Browser View

Server Name Remark

-------------------------------------------------------------------------------
\\PCM-XP01 Paul's PC

\\PCM-XP3

The command completed successfully.


Full Targets pcm-xp3 192.168.1.101 pcm-xp01 192.168.1.100 127.0.0.1

Target pcm-xp3

"PCM-XP3 ping pcm-xp3"



Pinging pcm-xp3.amer.cisco.com [192.168.1.101] with 32 bytes of data:



Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128



Ping statistics for 192.168.1.101:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP3 net view pcm-xp3"

Shared resources at pcm-xp3



Share name Type Used as Comment

-------------------------------------------------------------------------------
hpdeskje Print hp deskjet 950c series
Paul Disk
SharedDocs Disk
The command completed successfully.


Target 192.168.1.101

"PCM-XP3 ping 192.168.1.101"



Pinging 192.168.1.101 with 32 bytes of data:



Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128



Ping statistics for 192.168.1.101:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP3 net view 192.168.1.101"

Shared resources at 192.168.1.101



Share name Type Used as Comment

-------------------------------------------------------------------------------
hpdeskje Print hp deskjet 950c series
Paul Disk
SharedDocs Disk
The command completed successfully.


Target pcm-xp01

"PCM-XP3 ping pcm-xp01"



Pinging pcm-xp01 [192.168.1.100] with 32 bytes of data:



Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128



Ping statistics for 192.168.1.100:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP3 net view pcm-xp01"

Shared resources at pcm-xp01

Paul's PC

Share name Type Used as Comment

-------------------------------------------------------------------------------
Paul-save Disk
The command completed successfully.


Target 192.168.1.100

"PCM-XP3 ping 192.168.1.100"



Pinging 192.168.1.100 with 32 bytes of data:



Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128



Ping statistics for 192.168.1.100:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP3 net view 192.168.1.100"

Shared resources at 192.168.1.100

Paul's PC

Share name Type Used as Comment

-------------------------------------------------------------------------------
Paul-save Disk
The command completed successfully.


Target 127.0.0.1

"PCM-XP3 ping 127.0.0.1"



Pinging 127.0.0.1 with 32 bytes of data:



Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128



Ping statistics for 127.0.0.1:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP3 net view 127.0.0.1"

Shared resources at 127.0.0.1



Share name Type Used as Comment

-------------------------------------------------------------------------------
hpdeskje Print hp deskjet 950c series
Paul Disk
SharedDocs Disk
The command completed successfully.


Ping Targets www.yahoo.com 66.94.230.32 192.168.1.1

Target www.yahoo.com

"PCM-XP3 ping www.yahoo.com"



Pinging www.yahoo.akadns.net [216.109.117.107] with 32 bytes of data:



Reply from 216.109.117.107: bytes=32 time=37ms TTL=49

Reply from 216.109.117.107: bytes=32 time=37ms TTL=49

Reply from 216.109.117.107: bytes=32 time=38ms TTL=49

Reply from 216.109.117.107: bytes=32 time=38ms TTL=49



Ping statistics for 216.109.117.107:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 37ms, Maximum = 38ms, Average = 37ms


Target 66.94.230.32

"PCM-XP3 ping 66.94.230.32"



Pinging 66.94.230.32 with 32 bytes of data:



Reply from 66.94.230.32: bytes=32 time=85ms TTL=46

Reply from 66.94.230.32: bytes=32 time=84ms TTL=47

Reply from 66.94.230.32: bytes=32 time=84ms TTL=46

Reply from 66.94.230.32: bytes=32 time=85ms TTL=46



Ping statistics for 66.94.230.32:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 84ms, Maximum = 85ms, Average = 84ms


Target 192.168.1.1

"PCM-XP3 ping 192.168.1.1"



Pinging 192.168.1.1 with 32 bytes of data:



Reply from 192.168.1.1: bytes=32 time<1ms TTL=64

Reply from 192.168.1.1: bytes=32 time<1ms TTL=64

Reply from 192.168.1.1: bytes=32 time<1ms TTL=64

Reply from 192.168.1.1: bytes=32 time<1ms TTL=64



Ping statistics for 192.168.1.1:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


End diagnosis for PCM-XP3

CDiagnosis V1.33
Start diagnosis for PCM-XP01

Enumerate Shares


Share name Resource Remark

-------------------------------------------------------------------------------
D$ D:\ Default share

print$ C:\WINDOWS\System32\spool\drivers
Printer Drivers

G$ G:\ Default share

ADMIN$ C:\WINDOWS Remote Admin

C$ C:\ Default share

IPC$ Remote IPC

Paul-save C:\Paul-save
The command completed successfully.


Adhoc Browser View

Server Name Remark

-------------------------------------------------------------------------------
\\PCM-XP01 Paul's PC

\\PCM-XP3

The command completed successfully.


Full Targets pcm-xp3 192.168.1.101 pcm-xp01 192.168.1.100 127.0.0.1

Target pcm-xp3

"PCM-XP01 ping pcm-xp3"



Pinging pcm-xp3 [192.168.1.101] with 32 bytes of data:



Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128



Ping statistics for 192.168.1.101:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP01 net view pcm-xp3"

Shared resources at pcm-xp3



Share name Type Used as Comment

-------------------------------------------------------------------------------
hpdeskje Print hp deskjet 950c series
Paul Disk
SharedDocs Disk
The command completed successfully.


Target 192.168.1.101

"PCM-XP01 ping 192.168.1.101"



Pinging 192.168.1.101 with 32 bytes of data:



Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128



Ping statistics for 192.168.1.101:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP01 net view 192.168.1.101"

Shared resources at 192.168.1.101



Share name Type Used as Comment

-------------------------------------------------------------------------------
hpdeskje Print hp deskjet 950c series
Paul Disk
SharedDocs Disk
The command completed successfully.


Target pcm-xp01

"PCM-XP01 ping pcm-xp01"



Pinging PCM-XP01.amer.cisco.com [192.168.1.100] with 32 bytes of data:



Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128



Ping statistics for 192.168.1.100:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP01 net view pcm-xp01"

Shared resources at pcm-xp01

Paul's PC

Share name Type Used as Comment

-------------------------------------------------------------------------------
Paul-save Disk
The command completed successfully.


Target 192.168.1.100

"PCM-XP01 ping 192.168.1.100"



Pinging 192.168.1.100 with 32 bytes of data:



Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128



Ping statistics for 192.168.1.100:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP01 net view 192.168.1.100"

Shared resources at 192.168.1.100

Paul's PC

Share name Type Used as Comment

-------------------------------------------------------------------------------
Paul-save Disk
The command completed successfully.


Target 127.0.0.1

"PCM-XP01 ping 127.0.0.1"



Pinging 127.0.0.1 with 32 bytes of data:



Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128



Ping statistics for 127.0.0.1:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP01 net view 127.0.0.1"

Shared resources at 127.0.0.1

Paul's PC

Share name Type Used as Comment

-------------------------------------------------------------------------------
Paul-save Disk
The command completed successfully.


Ping Targets www.yahoo.com 66.94.230.32 192.168.1.1

Target www.yahoo.com

"PCM-XP01 ping www.yahoo.com"



Pinging www.yahoo.akadns.net [216.109.118.76] with 32 bytes of data:



Reply from 216.109.118.76: bytes=32 time=41ms TTL=47

Reply from 216.109.118.76: bytes=32 time=39ms TTL=47

Reply from 216.109.118.76: bytes=32 time=39ms TTL=47

Reply from 216.109.118.76: bytes=32 time=38ms TTL=47



Ping statistics for 216.109.118.76:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 38ms, Maximum = 41ms, Average = 39ms


Target 66.94.230.32

"PCM-XP01 ping 66.94.230.32"



Pinging 66.94.230.32 with 32 bytes of data:



Reply from 66.94.230.32: bytes=32 time=90ms TTL=47

Reply from 66.94.230.32: bytes=32 time=84ms TTL=47

Reply from 66.94.230.32: bytes=32 time=85ms TTL=46

Reply from 66.94.230.32: bytes=32 time=85ms TTL=47



Ping statistics for 66.94.230.32:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 84ms, Maximum = 90ms, Average = 86ms


Target 192.168.1.1

"PCM-XP01 ping 192.168.1.1"



Pinging 192.168.1.1 with 32 bytes of data:



Reply from 192.168.1.1: bytes=32 time=1ms TTL=64

Reply from 192.168.1.1: bytes=32 time<1ms TTL=64

Reply from 192.168.1.1: bytes=32 time=1ms TTL=64

Reply from 192.168.1.1: bytes=32 time<1ms TTL=64



Ping statistics for 192.168.1.1:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 1ms, Average = 0ms


End diagnosis for PCM-XP01
 
Paul,

From what you have said, it might be that the authentication is different
now. See when you add the computer to the work domain the credentials are
different now to the other computers.

say A is the new computer and B and C are the old ones.
when you try to connect from B or C to A, you get access denied but do you
get a window asking for password? to authenticate into this computer, you
need \\computername\useraccount and then the password.

try the net use command from the command prompt. for the specific syntax
use
net use /?

Also if you have the firewall enable on that computer, file and folder
sharing is not allowed. If you have symantec or mcafee firewall, they also
block file sharing.

hope this helps,
Rafael


Paul said:
Configuration:

Three PCs each running XP SP2
Local network with Router for net access

Background:

One PC is new. I put this on the net, set up everything and was able to
share folders and use them on one of the other computers. Then, I took the
PC
to work and added it to a domain (like I had done with the other PCs),
installed more S/W, Virus scan, and security agent, etc. so that I can VPN
into work from home.

Issue:

When reinstalled into my home network. Both of the older PCs CANNOT see
the
share on this new machine. However, they can see shares between each other
and the new computer can see the shares on the older computers.

I tried numerous things, like switching from Simple File Sharing to custom
and searching the posts here and I'm stuck. I can't get it to work. I even
turned off the security agent running on each machine.

The message I see, when I try to use a share is "\\pcm-xp3\Paul is not
accessible. You might not have permissions to use this network resource.
Contact the administrator of this server to find out if you have access
permissions. Not enough server storage is available to process this
command.".

I'm logged into both machines using the local account. I'm admin, and the
passwords are the same. Under share permissions I made sure I had
permissions, as do "Users" and under security I made sure "Everyone" had
full
control permissions.

Below is the CDIAG output from the machine that is providing the share
that
cannot be accessed (PCM-XP3) and then for one of the machines that is
trying
to access the share (PCM-XP01). I disconnected the third system from the
network, just to simplify the tests.

Any advice would be greatly appreciated! I've been banging my head against
the monitor for two days now :^(


CDiagnosis V1.33
Start diagnosis for PCM-XP3

Enumerate Shares


Share name Resource Remark

-------------------------------------------------------------------------------
C$ C:\ Default share

print$ C:\WINDOWS\system32\spool\drivers
Printer Drivers

ADMIN$ C:\WINDOWS Remote Admin

IPC$ Remote IPC

Paul C:\Paul
SharedDocs C:\DOCUMENTS AND SETTINGS\ALL USERS\DOCUMENTS

hpdeskje USB001 Spooled hp deskjet 950c series

The command completed successfully.


Adhoc Browser View

Server Name Remark

-------------------------------------------------------------------------------
\\PCM-XP01 Paul's PC

\\PCM-XP3

The command completed successfully.


Full Targets pcm-xp3 192.168.1.101 pcm-xp01 192.168.1.100 127.0.0.1

Target pcm-xp3

"PCM-XP3 ping pcm-xp3"



Pinging pcm-xp3.amer.cisco.com [192.168.1.101] with 32 bytes of data:



Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128



Ping statistics for 192.168.1.101:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP3 net view pcm-xp3"

Shared resources at pcm-xp3



Share name Type Used as Comment

-------------------------------------------------------------------------------
hpdeskje Print hp deskjet 950c series
Paul Disk
SharedDocs Disk
The command completed successfully.


Target 192.168.1.101

"PCM-XP3 ping 192.168.1.101"



Pinging 192.168.1.101 with 32 bytes of data:



Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128



Ping statistics for 192.168.1.101:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP3 net view 192.168.1.101"

Shared resources at 192.168.1.101



Share name Type Used as Comment

-------------------------------------------------------------------------------
hpdeskje Print hp deskjet 950c series
Paul Disk
SharedDocs Disk
The command completed successfully.


Target pcm-xp01

"PCM-XP3 ping pcm-xp01"



Pinging pcm-xp01 [192.168.1.100] with 32 bytes of data:



Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128



Ping statistics for 192.168.1.100:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP3 net view pcm-xp01"

Shared resources at pcm-xp01

Paul's PC

Share name Type Used as Comment

-------------------------------------------------------------------------------
Paul-save Disk
The command completed successfully.


Target 192.168.1.100

"PCM-XP3 ping 192.168.1.100"



Pinging 192.168.1.100 with 32 bytes of data:



Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128



Ping statistics for 192.168.1.100:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP3 net view 192.168.1.100"

Shared resources at 192.168.1.100

Paul's PC

Share name Type Used as Comment

-------------------------------------------------------------------------------
Paul-save Disk
The command completed successfully.


Target 127.0.0.1

"PCM-XP3 ping 127.0.0.1"



Pinging 127.0.0.1 with 32 bytes of data:



Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128



Ping statistics for 127.0.0.1:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP3 net view 127.0.0.1"

Shared resources at 127.0.0.1



Share name Type Used as Comment

-------------------------------------------------------------------------------
hpdeskje Print hp deskjet 950c series
Paul Disk
SharedDocs Disk
The command completed successfully.


Ping Targets www.yahoo.com 66.94.230.32 192.168.1.1

Target www.yahoo.com

"PCM-XP3 ping www.yahoo.com"



Pinging www.yahoo.akadns.net [216.109.117.107] with 32 bytes of data:



Reply from 216.109.117.107: bytes=32 time=37ms TTL=49

Reply from 216.109.117.107: bytes=32 time=37ms TTL=49

Reply from 216.109.117.107: bytes=32 time=38ms TTL=49

Reply from 216.109.117.107: bytes=32 time=38ms TTL=49



Ping statistics for 216.109.117.107:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 37ms, Maximum = 38ms, Average = 37ms


Target 66.94.230.32

"PCM-XP3 ping 66.94.230.32"



Pinging 66.94.230.32 with 32 bytes of data:



Reply from 66.94.230.32: bytes=32 time=85ms TTL=46

Reply from 66.94.230.32: bytes=32 time=84ms TTL=47

Reply from 66.94.230.32: bytes=32 time=84ms TTL=46

Reply from 66.94.230.32: bytes=32 time=85ms TTL=46



Ping statistics for 66.94.230.32:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 84ms, Maximum = 85ms, Average = 84ms


Target 192.168.1.1

"PCM-XP3 ping 192.168.1.1"



Pinging 192.168.1.1 with 32 bytes of data:



Reply from 192.168.1.1: bytes=32 time<1ms TTL=64

Reply from 192.168.1.1: bytes=32 time<1ms TTL=64

Reply from 192.168.1.1: bytes=32 time<1ms TTL=64

Reply from 192.168.1.1: bytes=32 time<1ms TTL=64



Ping statistics for 192.168.1.1:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


End diagnosis for PCM-XP3

CDiagnosis V1.33
Start diagnosis for PCM-XP01

Enumerate Shares


Share name Resource Remark

-------------------------------------------------------------------------------
D$ D:\ Default share

print$ C:\WINDOWS\System32\spool\drivers
Printer Drivers

G$ G:\ Default share

ADMIN$ C:\WINDOWS Remote Admin

C$ C:\ Default share

IPC$ Remote IPC

Paul-save C:\Paul-save
The command completed successfully.


Adhoc Browser View

Server Name Remark

-------------------------------------------------------------------------------
\\PCM-XP01 Paul's PC

\\PCM-XP3

The command completed successfully.


Full Targets pcm-xp3 192.168.1.101 pcm-xp01 192.168.1.100 127.0.0.1

Target pcm-xp3

"PCM-XP01 ping pcm-xp3"



Pinging pcm-xp3 [192.168.1.101] with 32 bytes of data:



Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128



Ping statistics for 192.168.1.101:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP01 net view pcm-xp3"

Shared resources at pcm-xp3



Share name Type Used as Comment

-------------------------------------------------------------------------------
hpdeskje Print hp deskjet 950c series
Paul Disk
SharedDocs Disk
The command completed successfully.


Target 192.168.1.101

"PCM-XP01 ping 192.168.1.101"



Pinging 192.168.1.101 with 32 bytes of data:



Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128



Ping statistics for 192.168.1.101:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP01 net view 192.168.1.101"

Shared resources at 192.168.1.101



Share name Type Used as Comment

-------------------------------------------------------------------------------
hpdeskje Print hp deskjet 950c series
Paul Disk
SharedDocs Disk
The command completed successfully.


Target pcm-xp01

"PCM-XP01 ping pcm-xp01"



Pinging PCM-XP01.amer.cisco.com [192.168.1.100] with 32 bytes of data:



Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128



Ping statistics for 192.168.1.100:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP01 net view pcm-xp01"

Shared resources at pcm-xp01

Paul's PC

Share name Type Used as Comment

-------------------------------------------------------------------------------
Paul-save Disk
The command completed successfully.


Target 192.168.1.100

"PCM-XP01 ping 192.168.1.100"



Pinging 192.168.1.100 with 32 bytes of data:



Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128



Ping statistics for 192.168.1.100:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP01 net view 192.168.1.100"

Shared resources at 192.168.1.100

Paul's PC

Share name Type Used as Comment

-------------------------------------------------------------------------------
Paul-save Disk
The command completed successfully.


Target 127.0.0.1

"PCM-XP01 ping 127.0.0.1"



Pinging 127.0.0.1 with 32 bytes of data:



Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128



Ping statistics for 127.0.0.1:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP01 net view 127.0.0.1"

Shared resources at 127.0.0.1

Paul's PC

Share name Type Used as Comment

-------------------------------------------------------------------------------
Paul-save Disk
The command completed successfully.


Ping Targets www.yahoo.com 66.94.230.32 192.168.1.1

Target www.yahoo.com

"PCM-XP01 ping www.yahoo.com"



Pinging www.yahoo.akadns.net [216.109.118.76] with 32 bytes of data:



Reply from 216.109.118.76: bytes=32 time=41ms TTL=47

Reply from 216.109.118.76: bytes=32 time=39ms TTL=47

Reply from 216.109.118.76: bytes=32 time=39ms TTL=47

Reply from 216.109.118.76: bytes=32 time=38ms TTL=47



Ping statistics for 216.109.118.76:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 38ms, Maximum = 41ms, Average = 39ms


Target 66.94.230.32

"PCM-XP01 ping 66.94.230.32"



Pinging 66.94.230.32 with 32 bytes of data:



Reply from 66.94.230.32: bytes=32 time=90ms TTL=47

Reply from 66.94.230.32: bytes=32 time=84ms TTL=47

Reply from 66.94.230.32: bytes=32 time=85ms TTL=46

Reply from 66.94.230.32: bytes=32 time=85ms TTL=47



Ping statistics for 66.94.230.32:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 84ms, Maximum = 90ms, Average = 86ms


Target 192.168.1.1

"PCM-XP01 ping 192.168.1.1"



Pinging 192.168.1.1 with 32 bytes of data:



Reply from 192.168.1.1: bytes=32 time=1ms TTL=64

Reply from 192.168.1.1: bytes=32 time<1ms TTL=64

Reply from 192.168.1.1: bytes=32 time=1ms TTL=64

Reply from 192.168.1.1: bytes=32 time<1ms TTL=64



Ping statistics for 192.168.1.1:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 1ms, Average = 0ms


End diagnosis for PCM-XP01
Click to expand...
 
Rafael T said:
Paul,

From what you have said, it might be that the authentication is different
now. See when you add the computer to the work domain the credentials are
different now to the other computers.
Click to expand...

Is that true, even when the other two computers have been added to the same
domain previously?

Is there a way that I can check to see what the authentication is on the
machines to tell if they are different?


say A is the new computer and B and C are the old ones.
when you try to connect from B or C to A, you get access denied but do you
get a window asking for password? to authenticate into this computer, you
need \\computername\useraccount and then the password.
Click to expand...

I'll give that a try. I was wondering how one gets it to ask for
username/password when accessing another machine.

Will I need to do that each time I connect to the other machine?

Ideally, I'd like to have PCM-XP2 add \\PCM-XP3\Paul share and then I want
to "Make available offline" so that it syncs the information to PCM-XP2. That
way, if PCM-XP3 is shut down, I can access older versions of the files.

Do you think I'll be able to get to that point? Will I need to authenticate
each time I boot up PCM-XP2 and try to access the share, or will it
"remember" the authentication, once I successfully get in?

try the net use command from the command prompt. for the specific syntax
use
net use /?
Click to expand...

Will try.
Also if you have the firewall enable on that computer, file and folder
sharing is not allowed.
Click to expand...

I have the firewall off on both computers as they sit behind a router that
hides them from the Internet.
If you have symantec or mcafee firewall, they also
block file sharing.
Click to expand...

I have Network Associates VirusScan (same version) running on all machines.
Do you know if that blocks file sharing and if I it does, can I disable that
"protection"?

hope this helps,
Rafael
Click to expand...

Thanks for all the suggestions! I'll post my results, after I try this
tonight.

Paul.

Paul said:
Configuration:

Three PCs each running XP SP2
Local network with Router for net access

Background:

One PC is new. I put this on the net, set up everything and was able to
share folders and use them on one of the other computers. Then, I took the
PC
to work and added it to a domain (like I had done with the other PCs),
installed more S/W, Virus scan, and security agent, etc. so that I can VPN
into work from home.

Issue:

When reinstalled into my home network. Both of the older PCs CANNOT see
the
share on this new machine. However, they can see shares between each other
and the new computer can see the shares on the older computers.

I tried numerous things, like switching from Simple File Sharing to custom
and searching the posts here and I'm stuck. I can't get it to work. I even
turned off the security agent running on each machine.

The message I see, when I try to use a share is "\\pcm-xp3\Paul is not
accessible. You might not have permissions to use this network resource.
Contact the administrator of this server to find out if you have access
permissions. Not enough server storage is available to process this
command.".

I'm logged into both machines using the local account. I'm admin, and the
passwords are the same. Under share permissions I made sure I had
permissions, as do "Users" and under security I made sure "Everyone" had
full
control permissions.

Below is the CDIAG output from the machine that is providing the share
that
cannot be accessed (PCM-XP3) and then for one of the machines that is
trying
to access the share (PCM-XP01). I disconnected the third system from the
network, just to simplify the tests.

Any advice would be greatly appreciated! I've been banging my head against
the monitor for two days now :^(


CDiagnosis V1.33
Start diagnosis for PCM-XP3

Enumerate Shares


Share name Resource Remark

-------------------------------------------------------------------------------
C$ C:\ Default share

print$ C:\WINDOWS\system32\spool\drivers
Printer Drivers

ADMIN$ C:\WINDOWS Remote Admin

IPC$ Remote IPC

Paul C:\Paul
SharedDocs C:\DOCUMENTS AND SETTINGS\ALL USERS\DOCUMENTS

hpdeskje USB001 Spooled hp deskjet 950c series

The command completed successfully.


Adhoc Browser View

Server Name Remark

-------------------------------------------------------------------------------
\\PCM-XP01 Paul's PC

\\PCM-XP3

The command completed successfully.


Full Targets pcm-xp3 192.168.1.101 pcm-xp01 192.168.1.100 127.0.0.1

Target pcm-xp3

"PCM-XP3 ping pcm-xp3"



Pinging pcm-xp3.amer.cisco.com [192.168.1.101] with 32 bytes of data:



Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128



Ping statistics for 192.168.1.101:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP3 net view pcm-xp3"

Shared resources at pcm-xp3



Share name Type Used as Comment

-------------------------------------------------------------------------------
hpdeskje Print hp deskjet 950c series
Paul Disk
SharedDocs Disk
The command completed successfully.


Target 192.168.1.101

"PCM-XP3 ping 192.168.1.101"



Pinging 192.168.1.101 with 32 bytes of data:



Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128



Ping statistics for 192.168.1.101:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP3 net view 192.168.1.101"

Shared resources at 192.168.1.101



Share name Type Used as Comment

-------------------------------------------------------------------------------
hpdeskje Print hp deskjet 950c series
Paul Disk
SharedDocs Disk
The command completed successfully.


Target pcm-xp01

"PCM-XP3 ping pcm-xp01"



Pinging pcm-xp01 [192.168.1.100] with 32 bytes of data:



Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128



Ping statistics for 192.168.1.100:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP3 net view pcm-xp01"

Shared resources at pcm-xp01

Paul's PC

Share name Type Used as Comment

-------------------------------------------------------------------------------
Paul-save Disk
The command completed successfully.


Target 192.168.1.100

"PCM-XP3 ping 192.168.1.100"



Pinging 192.168.1.100 with 32 bytes of data:



Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128



Ping statistics for 192.168.1.100:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP3 net view 192.168.1.100"

Shared resources at 192.168.1.100

Paul's PC

Share name Type Used as Comment

-------------------------------------------------------------------------------
Paul-save Disk
The command completed successfully.


Target 127.0.0.1

"PCM-XP3 ping 127.0.0.1"



Pinging 127.0.0.1 with 32 bytes of data:



Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Click to expand...
Click to expand...
 
When reinstalled into my home network. Both of the older PCs CANNOT see the
share on this new machine. However, they can see shares between each other
and the new computer can see the shares on the older computers.
Click to expand...

I believe that this is by design as the new computer is part of the domain.
moreover, i believe that this will depend on how you are logged onto the
other computers. if you are logged onto the older computers with a local
profile and not a domain profile then the local profile will not be
recognized by the "New" computer when you try to access the share. but, you
should be prompted for a logon with a connect to box. if the share you are
trying to access is on the "NEW" machine then you would need to log onto it
with a domain account that has previously logged onto that particular
computer (So, the UN PW are in the SAM database). If the connect to box has
two text boxes then the format is yourdomain\domainusername in the first box
and in the second box the pw. If the connect to box as three text boxes then
the first box has the domainusername, the second is the pw and the third is
the domainname.

If you want to connect to this share with a local profile the share may not
recognize the un pw because it may require a domain un pw, if the share was
created under the domain profile.

If the share was created under a local profile then it will expect a un/pw
on the local computer. in other words you have to use a un\pw of a profile
that resides on the computer hosting the share.

So, the error ""\\pcm-xp3\Paul is not
accessible. You might not have permissions to use this network resource.
Contact the administrator of this server to find out if you have access
permissions. Not enough server storage is available to process this command."
specifies a permissions issue...so you need to use a UN\PW that is specific
to the pcm-xp3 workstation.

For instance, if you attemot to connect to the pcm-xp3\Paul share from the
pcm-xp01 comouter the pcm-xp3 computer sees the attempted logon as
pcm-xp01\yourusername, PW and what it is looking for is
pcm-xp3\yourusername, PW. As you can see they are different and therefore
the connection request will be rejected.

i am assuming that the computer anme here is pcm-xp3. Try connecting from
the run command, it should prompt you for a UN\pw and you should be able to
imput the correct information for the machine hosting. Hmmmm..I hope i did
not confise the issue.

Beau



I'm logged into both machines using the local account. I'm admin, and the
passwords are the same. Under share permissions I made sure I had
permissions, as do "Users" and under security I made sure "Everyone" had full
control permissions.

Below is the CDIAG output from the machine that is providing the share that
cannot be accessed (PCM-XP3) and then for one of the machines that is trying
to access the share (PCM-XP01). I disconnected the third system from the
network, just to simplify the tests.

Any advice would be greatly appreciated! I've been banging my head against
the monitor for two days now :^(


CDiagnosis V1.33
Start diagnosis for PCM-XP3

Enumerate Shares


Share name Resource Remark

-------------------------------------------------------------------------------
C$ C:\ Default share

print$ C:\WINDOWS\system32\spool\drivers
Printer Drivers

ADMIN$ C:\WINDOWS Remote Admin

IPC$ Remote IPC

Paul C:\Paul
SharedDocs C:\DOCUMENTS AND SETTINGS\ALL USERS\DOCUMENTS

hpdeskje USB001 Spooled hp deskjet 950c series

The command completed successfully.


Adhoc Browser View

Server Name Remark

-------------------------------------------------------------------------------
\\PCM-XP01 Paul's PC

\\PCM-XP3

The command completed successfully.


Full Targets pcm-xp3 192.168.1.101 pcm-xp01 192.168.1.100 127.0.0.1

Target pcm-xp3

"PCM-XP3 ping pcm-xp3"



Pinging pcm-xp3.amer.cisco.com [192.168.1.101] with 32 bytes of data:



Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128



Ping statistics for 192.168.1.101:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP3 net view pcm-xp3"

Shared resources at pcm-xp3



Share name Type Used as Comment

-------------------------------------------------------------------------------
hpdeskje Print hp deskjet 950c series
Paul Disk
SharedDocs Disk
The command completed successfully.


Target 192.168.1.101

"PCM-XP3 ping 192.168.1.101"



Pinging 192.168.1.101 with 32 bytes of data:



Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128

Reply from 192.168.1.101: bytes=32 time<1ms TTL=128



Ping statistics for 192.168.1.101:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP3 net view 192.168.1.101"

Shared resources at 192.168.1.101



Share name Type Used as Comment

-------------------------------------------------------------------------------
hpdeskje Print hp deskjet 950c series
Paul Disk
SharedDocs Disk
The command completed successfully.


Target pcm-xp01

"PCM-XP3 ping pcm-xp01"



Pinging pcm-xp01 [192.168.1.100] with 32 bytes of data:



Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128



Ping statistics for 192.168.1.100:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP3 net view pcm-xp01"

Shared resources at pcm-xp01

Paul's PC

Share name Type Used as Comment

-------------------------------------------------------------------------------
Paul-save Disk
The command completed successfully.


Target 192.168.1.100

"PCM-XP3 ping 192.168.1.100"



Pinging 192.168.1.100 with 32 bytes of data:



Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128

Reply from 192.168.1.100: bytes=32 time<1ms TTL=128



Ping statistics for 192.168.1.100:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP3 net view 192.168.1.100"

Shared resources at 192.168.1.100

Paul's PC

Share name Type Used as Comment

-------------------------------------------------------------------------------
Paul-save Disk
The command completed successfully.


Target 127.0.0.1

"PCM-XP3 ping 127.0.0.1"



Pinging 127.0.0.1 with 32 bytes of data:



Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128



Ping statistics for 127.0.0.1:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms


"PCM-XP3 net view 127.0.0.1"

Shared resources at 127.0.0.1



Share name Type Used as Comment

-------------------------------------------------------------------------------
hpdeskje Print hp deskjet 950c series
Paul Disk
SharedDocs Disk
The command completed successfully.


Ping Targets www.yahoo.com 66.94.230.32 192.168.1.1

Target www.yahoo.com

"PCM-XP3 ping www.yahoo.com"



Pinging www.yahoo.akadns.net [216.109.117.107] with 32 bytes of data:
Click to expand...
 
Beau said:
I believe that this is by design as the new computer is part of the domain.
moreover, i believe that this will depend on how you are logged onto the
other computers. if you are logged onto the older computers with a local
profile and not a domain profile then the local profile will not be
recognized by the "New" computer when you try to access the share.
Click to expand...

On all three machines, I log into their local accounts as the same user
(using the same password).

but, you
should be prompted for a logon with a connect to box.
Click to expand...

I don't get a prompt for a username/password when I try to access the share
on PCM-XP3 (or on any machine for that matter - it just pops up the share or
gives the access error).


if the share you are
trying to access is on the "NEW" machine then you would need to log onto it
with a domain account that has previously logged onto that particular
computer (So, the UN PW are in the SAM database).
Click to expand...

would that be the case, even if I'm not logged into the new computer as a
domain user (and it's not connected to the domain). The only time any of the
machines are in a domain, is when I VPN into work, which then the machine
becomes isolated from the others on my home LAN.

If the connect to box has
two text boxes then the format is yourdomain\domainusername in the first box
and in the second box the pw. If the connect to box as three text boxes then
the first box has the domainusername, the second is the pw and the third is
the domainname.
Click to expand...

No prompts for login at all. I'll try the previously mentioned
\\pcm-xp3\username instead of \\pcm-xp3\sharename to see what happens. I'm
just wondering if I'll have to log in each time I try to connect to the
share, or if it will remember the setting. First of course, I have to see if
it works :^)

If you want to connect to this share with a local profile the share may not
recognize the un pw because it may require a domain un pw, if the share was
created under the domain profile.
Click to expand...

I was logged in as a local account when I (re)created the share.

If the share was created under a local profile then it will expect a un/pw
on the local computer. in other words you have to use a un\pw of a profile
that resides on the computer hosting the share.
Click to expand...

That's what's odd. It doesn't prompt for any login. I'm logged into both
machines under local accounts and I try to mount the share (same for the
admin share - C$).

So, the error ""\\pcm-xp3\Paul is not
accessible. You might not have permissions to use this network resource.
Contact the administrator of this server to find out if you have access
permissions. Not enough server storage is available to process this command."
specifies a permissions issue...so you need to use a UN\PW that is specific
to the pcm-xp3 workstation.

For instance, if you attemot to connect to the pcm-xp3\Paul share from the
pcm-xp01 comouter the pcm-xp3 computer sees the attempted logon as
pcm-xp01\yourusername, PW and what it is looking for is
pcm-xp3\yourusername, PW. As you can see they are different and therefore
the connection request will be rejected.
Click to expand...

Although, doing so from pcm-xp3 to pcm-xp01 WORKS, as does from pcm-xp01 to
pcm-xp2 machine. IOW, I can access a share on pcm-xp01, by just doing
\\pcm-xp01\sharename via Run... under the start menu.

i am assuming that the computer anme here is pcm-xp3.
Click to expand...

Yes. Machines are pcm-xp01, pcm-xp2, and pcm-xp3. All have been added to the
same domain, but no are currently connected to the domain.


Try connecting from
the run command, it should prompt you for a UN\pw and you should be able to
imput the correct information for the machine hosting.
Click to expand...

Will do.
Hmmmm..I hope i did
not confise the issue.
Click to expand...

Compared to the frustration I was going through Sunday... nope. you're
saying similar things to other posts, namely using my username to cause a
login prompt.

I'll post tonight, when I can give this another try.

I appreciate the suggestions everyone! This has been pretty tough to set-up.

Paul
 
Well, no joy here...

I tried the following from PCM-XP01, trying to connect to PCM-XP3 (the new
machine):

C:\>net use \\pcm-xp3\c$ /user:pcm-xp01\pcm
System error 1130 has occurred.

Not enough server storage is available to process this command.


C:\>net use \\pcm-xp3\c$ /user:pcm-xp3\pcm
System error 1219 has occurred.

Multiple connections to a server or shared resource by the same user, using
more
than one user name, are not allowed. Disconnect all previous connections to
the
server or shared resource and try again..

I get the same 1219 message, when I use a share name instead of c$. I don't
currently have a share to PCM-XP3 added to PCM-XP01, so I'm confused about
the multiple connections to a server message.

C:\>net use
New connections will be remembered.

There are no entries in the list.

Any thoughts? I'm really stumped...
 
Well, no joy here...

I tried the following from PCM-XP01, trying to connect to PCM-XP3 (the new
machine):

C:\>net use \\pcm-xp3\c$ /user:pcm-xp01\pcm
System error 1130 has occurred.

Not enough server storage is available to process this command.


C:\>net use \\pcm-xp3\c$ /user:pcm-xp3\pcm
System error 1219 has occurred.

Multiple connections to a server or shared resource by the same user, using
more
than one user name, are not allowed. Disconnect all previous connections to
the
server or shared resource and try again..

I get the same 1219 message, when I use a share name instead of c$. I don't
currently have a share to PCM-XP3 added to PCM-XP01, so I'm confused about
the multiple connections to a server message.

C:\>net use
New connections will be remembered.

There are no entries in the list.

Any thoughts? I'm really stumped...
Click to expand...

Paul,

This is a well known problem:
"Not enough server storage is available to process this command."
<http://nitecruzr.blogspot.com/2005/06/server-functionality-affected-by.html>
 
Chuck said:
Paul,

This is a well known problem:
"Not enough server storage is available to process this command."
<http://nitecruzr.blogspot.com/2005/06/server-functionality-affected-by.html>
Click to expand...

I had seen that, but was somewhat confused by the MS articles I read. In
particular, I'm running XP SP2 and I thought it said that the setting was
automatic and no registry entry needed. Should I create one anyway?

Also, it says in the above link, that this can be caused by Norton
AntiVirus. I'm using Network Associates VirusScan on all systems. Is there
any known issue with that app? BTW, I can access shares on PCM-XP01 from
PCM-XP3, so I'm wondering why both the registry and/or antivirus could be
causing issues.
 
Hey! I got it to work (at least partially so far). I set the IRPStackSize to
18 (even though it says it is dynamic in XP), restarted the Server service
and then tried to access the shares on PCM-XP3 from PCM-XP01 and I can do it!
Yeah!!!!

Now, this was with the security agent on each machine turned off (which I've
had it off while I'm testing) and I switched PCM-XP3 back to SImple File
Sharing, and set the share's security exactly as is on PCM-XP01.

One thing that I no longer see on PCM-XP01 (the system that is accessing the
share from PCM-XP3), is the "Make available offline" option on the right
clicked menu. Is there some setting I need to do, to get this working again -
I don't recall what I did (I'll do some research though).

I'm going to reboot both and see if I can still access the shares.

Thanks for the help!

Paul
 
Paul said:
Hey! I got it to work (at least partially so far). I set the IRPStackSize to
18 (even though it says it is dynamic in XP), restarted the Server service
and then tried to access the shares on PCM-XP3 from PCM-XP01 and I can do it!
Yeah!!!!

Now, this was with the security agent on each machine turned off (which I've
had it off while I'm testing) and I switched PCM-XP3 back to SImple File
Sharing, and set the share's security exactly as is on PCM-XP01.

One thing that I no longer see on PCM-XP01 (the system that is accessing the
share from PCM-XP3), is the "Make available offline" option on the right
clicked menu. Is there some setting I need to do, to get this working again -
I don't recall what I did (I'll do some research though).
Click to expand...

Found it. I had to got to Explorer, Folder Options, Offline Files and make
them available by checking the box.

I'm going to reboot both and see if I can still access the shares.
Click to expand...

I can access the shares after reboot. Looks like it was the IRPStackSize.

Thanks everyone for the help! I feel much better now.
 
Found it. I had to got to Explorer, Folder Options, Offline Files and make
them available by checking the box.



I can access the shares after reboot. Looks like it was the IRPStackSize.

Thanks everyone for the help! I feel much better now.
Click to expand...

Thanks for the update, Paul!
 
Back
Top