Can ping but can't see other stations

  • Thread starter Thread starter Ilsa
  • Start date Start date
I

Ilsa

Here is what the skinny is . I can ping from my location
say computer 5 but it will not let me see the other
computers on the peer to peer network. Ican get out on my
gateway and I can print to networked printers that are on
this same p-t-p. Any ideas...
I have gone through everything that I can possibly think
of and now i am stuck!!!
 
Here is what the skinny is . I can ping from my location
say computer 5 but it will not let me see the other
computers on the peer to peer network. Ican get out on my
gateway and I can print to networked printers that are on
this same p-t-p. Any ideas...
I have gone through everything that I can possibly think
of and now i am stuck!!!

Ilsa,

Do any of the computers have a software firewall (ICF / WF, or third party)? If
so, you need to configure them for file sharing, by opening ports TCP 139, 445
and UDP 137, 138, 445, and / or by identifying the other computers as present in
the Local (Trusted) zone. Firewall configurations are a very common cause of
(network) browser, and file sharing, problems.

Are you running both Client for Microsoft Networks, and File and Printer Sharing
for Microsoft Networks (Local Area Connection - Properties), on each computer?
Do you have shares setup on each?

Are you running NetBIOS Over TCP/IP (Local Area Connection - Properties - TCP/IP
- Properties - Advanced - WINS) on each computer?

Make sure the browser service is running on each computer. Control Panel -
Administrative Tools - Services. Verify that the Computer Browser service shows
with Status = Started.

The Microsoft Browstat program will show us what browsers you have in your
domain / workgroup, at any time.
http://support.microsoft.com/?id=188305

You can download Browstat from:
<http://www.dynawell.com/reskit/microsoft/win2000/browstat.zip>
<http://rescomp.stanford.edu/staff/manual/rcc/tools/browstat.zip>

Browstat is very small (40K), needs no install, and runs from the command
prompt. Just drop it onto a couple workstations, and run it.

Please provide browstat information for each computer in question.
Start - Run - "cmd". Type "browstat status >c:\browstat.txt" into the command
window - Open c:\browstat.txt in Notepad, copy and paste into your next post.
Identify each computer by name and operating system please.

For more information about the browser subsystem (very intricate), see:
http://support.microsoft.com/?id=188001
http://support.microsoft.com/?id=188305
<http://www.microsoft.com/technet/prodtechnol/winntas/deploy/prodspecs/ntbrowse.mspx>

Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.
 
Here is what the skinny is . I can ping from my location
say computer 5 but it will not let me see the other
computers on the peer to peer network. Ican get out on my
gateway and I can print to networked printers that are on
this same p-t-p. Any ideas...
I have gone through everything that I can possibly think
of and now i am stuck!!!

Ilsa,

please have a look at http://www.michna.com/kb/WxNetwork.htm.

Hans-Georg
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Back
Top