D
Didier Eychenne
Hello,
For some days now, I can not burn CDRs. The problem is
that any software I use is telling me to insert an empty
disc even if there is one in the drive. Eject and retry
does not help
The drive is a DVR-RW drive (HL-DT-ST DVD-RW GWA-4040N)
on an Acer Ferrari 3000 Laptop.
By searching on the web, it seems it is a LG Drive.
Firmware are up to date (I didn't change anything).
I'm using Windows XP Pro SP1a with all critical updates.
I tested it with Nero 6.3.1.7, blindwrite but in fact it
seems to be a windows problem as in the explorer the new
disc is also not recognised.
I searched fro solutions on the web and could find a lot
of people with the same problem (not necessary with the
same drive) but without solutions.
I already tried to enable/disable the "Enable CD
recording on this drive" (Recording tab of the Drive
properties) and it did not help.
I also checked that I have the latest ASPI drivers.
Now, the wired thing. Sometimes, but only sometimes,
after a reboot and a quite long time before starting
again the machine (some hours), then I can burn ONE CDR,
but only ONE. This is burned correctly without errors.
I forget to mention that I can burn DVD (+ and -) and CD-
RW without problem.
Hope somebody can help me on this one
Thanks a lot in advance for your suggestions/solutions
Didier
For some days now, I can not burn CDRs. The problem is
that any software I use is telling me to insert an empty
disc even if there is one in the drive. Eject and retry
does not help
The drive is a DVR-RW drive (HL-DT-ST DVD-RW GWA-4040N)
on an Acer Ferrari 3000 Laptop.
By searching on the web, it seems it is a LG Drive.
Firmware are up to date (I didn't change anything).
I'm using Windows XP Pro SP1a with all critical updates.
I tested it with Nero 6.3.1.7, blindwrite but in fact it
seems to be a windows problem as in the explorer the new
disc is also not recognised.
I searched fro solutions on the web and could find a lot
of people with the same problem (not necessary with the
same drive) but without solutions.
I already tried to enable/disable the "Enable CD
recording on this drive" (Recording tab of the Drive
properties) and it did not help.
I also checked that I have the latest ASPI drivers.
Now, the wired thing. Sometimes, but only sometimes,
after a reboot and a quite long time before starting
again the machine (some hours), then I can burn ONE CDR,
but only ONE. This is burned correctly without errors.
I forget to mention that I can burn DVD (+ and -) and CD-
RW without problem.
Hope somebody can help me on this one
Thanks a lot in advance for your suggestions/solutions
Didier