Apply SP3 = BSOD

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Downloaded & intalled "Network" version (124Mb W2Ksp3.exe)
and then at the end it rebooted itself.
Now when it boots it gets as far as logging in my standard
default user, BSOD for about half a second (not long
enough to read msg) and then does a hardware reset. I can
log in only in safe mode.
I have run out of ideas on this one... hope somone can
help, tnx.
 
Since you can reboot in Safe Mode, it's one of your
drivers that causes the damage. Remove all non-essential
adapters (sound, network), then try again. If this does not
work then you have selectively disable non-essential
services until you find the culprit.
 
You must log in or register to reply here.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Windows 10 One of my previous builds is experiencing random, multiple BSODs 9
Why do I frequently get BSODs if I log in too fast? 2
BSOD issue 1
Vista won't load and enters reboot loop 10
hp pavilion a1647c bsod after sp3 install 5
Repair Install gives BSOD; next step? 21
BSOD unreadable as system reboots before I can read it 4
BSOD After WinXP Install 4

Back
Top