Antec Case w/ Antec trio - Fan Connections

[bern11]

There is a 2-wire 4-pin connector on the Trio which the website
indicates is a FAN RPM Monitor. Do I plug this into on of the chasis
fan ports on the mb so fan speed will be indicated?

How are people hooking up their fans? I put two on the power-supply
Fan-Only outputs and two on the Molex (so they always run). I ran
prime95 for 20 minutes, never got over 70 deg C, and the two other fans
never came on. (I'm not overclocking).

 

[Phisherman]

There is a 2-wire 4-pin connector on the Trio which the website
indicates is a FAN RPM Monitor. Do I plug this into on of the chasis
fan ports on the mb so fan speed will be indicated?

How are people hooking up their fans? I put two on the power-supply
Fan-Only outputs and two on the Molex (so they always run). I ran
prime95 for 20 minutes, never got over 70 deg C, and the two other fans
never came on. (I'm not overclocking).

I turn all fans on (HI settings if there is a choice) and plug into
the Fan-Only P/S, except for the CPU fan. I use 120mm fans whenever
possible.