AMD 3000+ Correct Config?

[mistafadedglory]

Hello,

I just bought a new AMD 3000+ Chip(Venice) and am thinking that it
needs to be tweaked I'm not into overclocking, but when I look at the
properties in windows it says it's 1.81 gHz. So, what do I need to
adjust to get that number higher? CPU Frequency(set at 200 now)? CPU
Multiplier (set at 1.0 currently)?

And what is a safe amount?

thanks in advance

 

[Larry Roberts]

Hello,

I just bought a new AMD 3000+ Chip(Venice) and am thinking that it
needs to be tweaked I'm not into overclocking, but when I look at the
properties in windows it says it's 1.81 gHz. So, what do I need to
adjust to get that number higher? CPU Frequency(set at 200 now)? CPU
Multiplier (set at 1.0 currently)?

And what is a safe amount?

thanks in advance

The 3000+ name is not the CPU's actual clock speed. It refers
to what Pentium clock it compares to. The Athlon64 3000+ Venice's
actual clock speed is 1.8Ghz. Even though the clock speed is low, it
runs as fast, or faster than it's Intel counter part.

 

[SteveH]

Hello,

I just bought a new AMD 3000+ Chip(Venice) and am thinking that it
needs to be tweaked I'm not into overclocking, but when I look at the
properties in windows it says it's 1.81 gHz. So, what do I need to
adjust to get that number higher? CPU Frequency(set at 200 now)? CPU
Multiplier (set at 1.0 currently)?

And what is a safe amount?

thanks in advance

Hi,
1.8Ghz is the correct frequency for your CPU, see here:
http://makeashorterlink.com/?X1FD21B4B

Don't forget, on AMD's the 3000+ isn't an indication of speed, its a
performance rating.

SteveH

 

[Mista Fadedglory]

OK, that's great information. Wanted to make sure that I didn't waste
my money. So, if this is the case, then I could have sworn when I had
an AMD 2700+ (only 32 bit) that it was running at 2.1 or 2.2 gHz. Did
I degrade?

Or are you saying that the AMD at 1.8 compares to the Intel at 3.0?

What would the clockspeed of a AMD 64 4000+ run at?

Sorry for so many questions

 

[SteveH]

OK, that's great information. Wanted to make sure that I didn't waste
my money. So, if this is the case, then I could have sworn when I had
an AMD 2700+ (only 32 bit) that it was running at 2.1 or 2.2 gHz. Did
I degrade?

Or are you saying that the AMD at 1.8 compares to the Intel at 3.0?
Yes

What would the clockspeed of a AMD 64 4000+ run at?

It's on that AMD page I linked to in my last post.

Sorry for so many questions

NP
SteveH

 

[Larry Roberts]

OK, that's great information. Wanted to make sure that I didn't waste
my money. So, if this is the case, then I could have sworn when I had
an AMD 2700+ (only 32 bit) that it was running at 2.1 or 2.2 gHz. Did
I degrade?

Or are you saying that the AMD at 1.8 compares to the Intel at 3.0?

What would the clockspeed of a AMD 64 4000+ run at?

Sorry for so many questions

Different chip architecture.

 

[Charlie Wilkes]

Hello,

I just bought a new AMD 3000+ Chip(Venice) and am thinking that it
needs to be tweaked I'm not into overclocking, but when I look at the
properties in windows it says it's 1.81 gHz. So, what do I need to
adjust to get that number higher? CPU Frequency(set at 200 now)? CPU
Multiplier (set at 1.0 currently)?

And what is a safe amount?

thanks in advance

I have that CPU, and I have set it to just over 2 ghz with no problem.
These days you can tweak it very easily through bios settings. It's
kid stuff, but what the hell.

Be sure you keep it cool. I removed the thermal pad and used Arctic
Silver grease, and I have an extra fan blowing on my motherboard.

Charlie