ADSL modem setting

A

abcclt

My ISP suggested doing the following to get around frequent
disconnection on my ADSL.
Will that be helpful? How do I do this?
Please hlep. Thanks in advance.
Set your PC IP ADDRESS as 192.168.1.2
Netmask as 255.255.255.0
Gateway as 192.168.1.1
Open Internet Explorer and connect to the below URL
http://192.168.1.1
user name- admin
Password - password
DSL setting
Enable the SRA

Abcclt
 
D

DanS

(e-mail address removed) wrote in @j33g2000cwa.googlegroups.com:
My ISP suggested doing the following to get around frequent
disconnection on my ADSL.
Will that be helpful? How do I do this?
Please hlep. Thanks in advance.
Set your PC IP ADDRESS as 192.168.1.2
Netmask as 255.255.255.0
Gateway as 192.168.1.1
Open Internet Explorer and connect to the below URL
http://192.168.1.1
user name- admin
Password - password
DSL setting
Enable the SRA

Abcclt

Need more info.....ADSL w/separate router ?

Disconnect's where ? The ADSL Modem to the ISP front-end ? Or your PC to
the router ?

Is aby of this connected w/USB ? (Hopefully not.)
 
A

abcclt

ADSL modem is DareGlobal DB108. It has only one Ethernet port. It is
connected to PC via NIC. PPPOE dialer is used to connect.
Abcclt
 
D

DanS

(e-mail address removed) wrote in @j73g2000cwa.googlegroups.com:
ADSL modem is DareGlobal DB108. It has only one Ethernet port. It is
connected to PC via NIC. PPPOE dialer is used to connect.
Abcclt

Sorry, but I myself fail to see the logic in what the ISP asks, and don't
know too much about PPOE DSL.
 
R

Ron Sommer

Go to Settings, Network Connections, right click on the DSL connection,
Properties, Properties of Internet Protocol
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top