A7V880 und XP-M 2400 (Barton) - Boot Init stalls

L

Lars Burk

Dear NG,

I have a problem with getting my system upgrade running. May be you can
provide some insights!

Here is the setup

be-quiet Power Supply 350W (newest Rev)
Asus A7v880 mit KT880
AMD Athlon XP-Mobile 2400 (Barton)
Arctic Silent Copper TC2
2 pieces TwinMos 256 MB PC3200 Cl2,5
ATI Radeon 9200
HD Samsung 80GB
DVD + CDRW

Everything setup properly double checked.

When I start the system up using the power button. Lights of keyboard CD and
DVD go shortly on, all the fans start up and I hear the HD spinning up! But
then nothing happens. The systems stays in this state. No VGA Signal. No
beeps in the init phase. Nothing.

I already tested different Ram, but really no difference. Next steps would
be to try another VGA card and finding another Athlon XP (non mobile) to see
if one of these components cause the problem! I already tried to unplug any
unnecessary hardware/pci card, even took out the CPU once, but no beeps no
changes, still stalling!

May be you can provide me with some help on this issue!


kind regards

Lars
 
E

Ed Light

Try just one memory stick, in one of the blue slots.

If that doesn't work you can try the bios reset jumper.

--
Ed Light

Smiley :-/
MS Smiley :-\

Send spam to the FTC at
(e-mail address removed)
Thanks, robots.
 
Top