a7n8x-x no POST after short powerdown

[Arjan van Lankveld]

Hi

I've got an a7n8x-x mobo with 512 MB mem (333 Mhz)
and a 2500+ CPU
Normally it boots OK, but after a powerdown it doesn't
post at all, (HD led and power led light up, but keyboard
leds don't, it doesn't even beep)
The only remedy seems to be to unplug the powerplug from
the wall socket and leave it out for about 5 minutes. After
that it boots again normally.
When it is not unplugged it might take more that an hour
before it is willing to boot again.

A (hard) reset instead of a powerdown does't cause this
problem, but it doesn't help when it is stuck before POST,
then only unplugging seems to help.

Another weird thing is that the the green led of the
NEC 2500 DVD+RW is always on when the power is down.
(don't know if this is supposed to, guess not)

At the store they told me they already replaced the PSU,
but it doesn't make any difference.

regards,
Arjan

 

[Mark McNally]

Hi

I've got an a7n8x-x mobo with 512 MB mem (333 Mhz) and a 2500+ CPU
Normally it boots OK, but after a powerdown it doesn't post at all,
(HD led and power led light up, but keyboard leds don't, it doesn't
even beep) The only remedy seems to be to unplug the powerplug from
the wall socket and leave it out for about 5 minutes. After that it
boots again normally. When it is not unplugged it might take more
that an hour before it is willing to boot again.

A (hard) reset instead of a powerdown does't cause this problem, but
it doesn't help when it is stuck before POST, then only unplugging
seems to help.

Another weird thing is that the the green led of the NEC 2500 DVD+RW
is always on when the power is down. (don't know if this is supposed
to, guess not)

At the store they told me they already replaced the PSU, but it
doesn't make any difference.

You may want to try a new/different power supply. I had similar
problems (not entirely the same), but after shutting down, my machine
would BOOT - it would POST and stop after that. A new power supply
solved this for me.

Mark