A simple network... possible?

  • Thread starter Thread starter kenny
  • Start date Start date
PC-1 is the modems designation for the first "customer" device connected to
it.
CPE Connections
The data shown in the table below provides information about the
customer premise equipment
(CPE) connected to your cable modem.
CPE MAC Address IP Address Connect To
PC-1 00:xx:xx:xx:5x:xx xx.xxx.xxx.xxx Ethernet


The modem usually has two possible connection ports- a USB port and an
ethernet port. A PC NIC cable or a USB cable (possibly with a driver) will
get the job done. Generally, the modem comes with one or the other of the
cables.The modem directions will usually specify what type of ethernet cable
to use.
 
I barely looked at your sketch. The entire idea that your are proposing is
just not a good one.
 
Your web server should be able to see these devices if its on the same subnet
as these devices.
 
Not that it really matters any, but this really isn't a simple network. Sure
simple on paper, but you will probably have problems in the long run.
 
no problems whatsoever.. worked like a charm!


Techdango said:
Not that it really matters any, but this really isn't a simple network.
Sure
simple on paper, but you will probably have problems in the long run.
Click to expand...
 
Back
Top